Owner manual

Turning the knurled ring (F) it is possible to increase the sensitivity of the
rain sensor.
The increase of the sensitivity of the rain sensor is signalled by a control
and acquisition “stroke”.
Operating the windscreen washer with the rain sensor activated will start
the smart washing function (without the additional cleaning stroke after
five seconds), at the end of which the rain sensor resumes its normal
automatic function.
Deactivation
Remove the stalk from position (B) or turn the ignition key to STOP.
At the following starting operation (key at MAR), the sensor will not be
reactivated even if the stalk is still at (B). To activate the rain sensor,
move the stalk to (A) or (C) and then again to (B) or turn the sensitivity
adjustment knurled ring.
Rain sensor activation is indicated by a wiper “stroke”.
The rain sensor is able to recognize and automatically adjust itself in the
presence of the following particular conditions:
❒ impurities on the controlled surface (salt, dirt, etc.);
❒ difference between day and night.
106
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
F0H0073m
Water streaks could cause non-required wiping.
WARNING