Owner manual

TO INCREASE THE MEMORISED SPEED
The speed memorised can be increased in two ways:
❒ pressing the accelerator and then memorising the
new speed reached;
or
❒ moving the stalk upwards (+).
Each operation of the stalk will correspond to a slight
increase in speed (about 1 km/h), while keeping the
stalk upwards continuously will correspond to a
continuous speed increase.
109
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
TO MEMORISE SPEED
Proceed as follows:
❒ turn the knurled ring (A) to ON and press the
accelerator pedal to the required speed;
❒ move the stalk upwards (+) for at least three
seconds, then release it. The car speed is
memorised and it is therefore possible to release
the accelerator pedal.
In the case of need (when overtaking for instance)
acceleration is possible simply pressing the accelerator
pedal: releasing the accelerator pedal, the car will
return to the speed memorised previously.
TO RESET THE MEMORISED SPEED
If the device has been disengaged for example pressing
the brake or clutch pedal, the memorised speed can
be reset as follows:
❒ accelerate gradually until reaching a speed
approaching the one memorised;
❒ engage the gear selected at the time of speed
memorising (4th or 5th gear);
❒ press the RES button (B).