Owner manual

FRONT SEAT BELT HEIGHT ADJUSTMENT (where provided)

Always adjust the height of the seat belt to fit the person wearing it. This

precaution could greatly reduce the risk of injury in case of collision.

Correct adjustment is obtained when the belt passes half way between

the end of the shoulder and the neck.

To adjust the seat belt, raise or lower knob (A) of the locking

mechanism, moving at the same time the loop (B) to the best of the

available positions.

USING THE CENTRAL SEAT BELT (where provided)

The seat belt has two webbings and a double buckle.

To use the seat belt, take tongues (H) and (P) from their seats in the reel

compartment and pull the seat belt sliding the webbing carefully without

twisting or jerking it, then fasten the tongue (G) in buckle (L) with button

(M).

154

CORRECT USE

OF THE CAR

WARNING

LIGHTS AND

MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX

DASHBOARD

AND CONTROLS

SAFETY

DEVICES

F0H0128m

WARNING

After adjustment, always check that the slider is anchored in one of the positions

provided. To do this, with the button released, exert a further pressure to allow the

anchor device to catch if release did not take place at one of the preset positions.

Make the height adjustment when the car is stationary.