Owner manual

236
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
IN AN
EMERGENCY
For versions with alloy rims
❒ Make sure that hub contact surfaces are clean;
❒ Refit the standard wheel fitting it on the pins, refit the fastening bolts
and tighten them using the wrench provided;
❒ Lower the car and remove the jack;
❒ Using the wrench provided, tighten the bolts in the sequence shown
previously for the space-saver spare wheel (see figure);
❒ Refit the snap-fitted wheel hub cap.
When you have finished
❒ Stow the spare wheel (C) in the space provided in the boot;
❒ Insert the jack partially open in its container (B) forcing it lightly to
prevent it from vibrating when travelling;
❒ Put the tools back into their places in the container;
❒ Stow the container complete with tools on the spare wheel and
secure everything with the clamping device (A);
❒ Correctly re-position the stiff cover.
F0H0161m