Owner manual

241
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
IN AN
EMERGENCY
MAIN BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ turn the cap (A) anticlockwise and remove it;
❒ disconnect the electrical connector (B);
❒ release the bulb catch (C);
❒ remove the bulb (D) and change it;
❒ refit the catch (C), connect the electrical connector (B) and fit the cap
(A) turning it clockwise. Put the cap ventilation outlet (H) from the
top downwards.
DIPPED BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove the protective cover releasing the relevant catch;
❒ disconnect the electrical connector (F);
❒ release the bulb catch (E);
❒ remove the bulb (G) and change it;
❒ fit a new bulb making the tabs of the metallic part coincide with the
grooves on the reflector, then hook the bulb holder catch (E) and re-
connect the electrical connector (F);
❒ refit the protective cover correctly.
F0H0181m
C
B
D
F0H0214m
F0H0182m