Owner manual

246
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
IN AN
EMERGENCY
F0H0193m
F0H0194m
F0H0195m
IF AN INTERIOR LIGHT BURNS OUT
For the type of bulb and power rating, see “When needing to change a
bulb”.
FRONT CEILING LIGHT
To change the bulb, proceed as follows:
❒ work in the points shown by the arrows and remove the light unit (A);
❒ open the protective cover (B);
❒ change the bulbs (C) releasing them from the side contacts and
making sure the new bulbs are correctly fastened between the
contacts;
❒ close the cover (B) and fasten the light unit (A) in its housing making
sure it clicks into place.
REAR CEILING LIGHT (where provided)
To change the bulb, proceed as follows:
❒ work in the points shown by the arrows and remove the light unit (D);
❒ open the protective cover (E);
❒ change the bulb (F) releasing it from the side contacts and making
sure the new bulb is correctly fastened between the contacts;
❒ close the cover (E) and fasten the light unit (D) in its housing making
sure it clicks into place.