Owner manual

At starting, if the code has not been recognised
correctly, the warning light
Y
will come on.
In this case, the key should be moved to the STOP
position and then back to MAR; if the lock continues,
possibly try again with the other key provided with the
car. If it is still not possible to start the car, follow the
instructions given in chapter “In an emergency” and
then contact a Fiat Dealership.
IMPORTANT Every key has its own code, which must
be memorised by the system control unit. To
memorise new keys, up to a maximum of eight, apply
to Fiat Dealership.
Warning light
Y
coming on when driving
❒ If the warning light
Y
turns on, this means that
the system is running a self-test (for example for a
voltage drop). At the first stop, turn the ignition
key to STOP and then to MAR again: if no failure is
detected warning light
Y
will not come on.
❒ If the warning light
Y
stays on, repeat the
procedure described previously leaving the key at
STOP for over 30 seconds. Should the
inconvenience persists, contact a Fiat Dealership.
❒ If the warning light
Y
stays on this means that the
code has not been recognised. In this case, the key
should be moved to the STOP position and then
back to MAR; if the lock continues, possibly try
again with the other key provided with the car. If it
is still not possible to start the car, follow the
instruction given in chapter “In an emergency”) and
then contact a Fiat Dealership.
6
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
The electronic components inside the key may be damaged if the key is submitted to sharp knocks.