Manual

82
When the ignition switch is turned to
“ON” and the lighting switch is turned to
the second or third position with the il-
lumination cancel switch in the OFF po-
sition, the display shows four types of in-
dication; odometer (A), tripmeter A (B),
tripmeter B (C) and indication of illumi-
nation intensity (D). Push the selector
knob (3) quickly to switch the indication
among the four. When the indication
shows (D), you can control the meter il-
lumination intensity. Refer to “Meter illu-
mination control” section below for de-
tails on how to dim or brighten the meter
illumination.
For details on how to use the illumination
cancel switch, refer to “Illumination Can-
cel Switch” in this section.
To reset the trip meter to zero, hold in
the selector knob (3) for about 2 seconds.
When the ignition switch is turned to
“ON” with the lighting switch is in the
“OFF” position, the display shows three
types of indication; odometer (A), trip
meter A (B) and trip meter B (C). Push
the selector knob (3) quickly to switch the
indication among the three.
(3)
(A) (B)
(C)
65D603
(3)
(A) (B)
(C)
(D)
65D532
(3)
65D481
About 2 seconds