Installation Instructions

12” PLAIN CURBS

MODEL SIZE

APPROX.

SHIP WT.

A B C D

TSB-200 24 x 24 x 12 287 lbs/130 kg 24(610) 24(610) 12(305) 12(305)

TSB-400 32 x 32 x 12 435 lbs/197 kg 32(813) 32(813) 16(406) 16(406)

TSB-600 36 x 36 x 12 545 lbs/247 kg 36(914) 36(914) 18(457) 18(457)

TSB-800 36 x 24 x 12 405 lbs/184 kg 36(914) 24(614) 18(457) 12(305)

Mop Service Basins

TSB 200 Series

General:

Precast terrazzo one piece products are made of black and white marble chips cast in

grey portland cement to produce a compressive strength of not less than 3000 P.S.I.,

seven days after casting. The terrazzo surface is ground and polished with all air

holes and/or pits grouted and the excess removed. Mop service basins are available

in custom sizes.

TSB series 12” (305) high. Shoulders shall not be less than 2” (51) wide with ½” (13)

pitch toward inside. The TSB 200 series is available with 12” plain curbs only.

The drain body in mop basins are made of stainless steel cast integrally and provide

for a caulked lead connection not less than 1” (25) deep to a 3” (76) pipe.

Installation:

Establish ¼” (6) clearance between mop service basin and building wall. It is

required that the entire area between the mop service basin and the building floor

has a ½” (13) layer of mortar in order that the mop service basin is level.

Optional stainless steel tiling flanges available.