Installation Guide

NOTE: For sloping landscape, step brackets down.
STAPLES
Holding the staple gun sideways, shoots 4 staples in a box pattern in each “picket and cross rail
intersection” so the staples hide vertically in the grain of the picket. To prevent staple buckling when
fired into pickets, go slow, push the staple gun firmly and make sure the fence panel is not bouncing
back towards the gun. Shorter 1 1/4 in., 16 gauge staples are also used frequently in low-temperature
installation to help prevent staple buckling. Set air-compressor to 90-100 PSI.
Cross Rail Installation
Picket Installation
FIBERONFENCING.COM
Please contact 1-800-215-2740 for further assistance.
Staple Pattern