Installation Guide

Pre-Installation (continued)
PRIOR TO INSTALLING THE FENCING
LAYOUT (See Diagram):
□ 2A. Establish total area to be fenced. Insert stakes 6 in. inside of proposed area extending an additional 3 ft. laterally so as
not to disturb string lines when digging post holes.
□ 2B. Attach string line to staked area. Verify corners are square using the 3 ft. x 4 ft. x 5 ft. method.
□ 2C. Fence corners are determined by where strings intersect.
□ 2D. Mark locations for subsequent posts starting with the first location and measuring the appropriate distance determined
by install method.
□ 2D-1. Face Mount 68 in. post-center to post-center
□ Mark gate location and size. Minimum 44 in. inside posts when using Adjustable Gate Frame.
□ Place proper post at each location.
NOTE: When marking measurements with spray paint, mark both the ground and string (See illustration)
4ft
2A
Corner
Post
2D1
72in or 68in
center
2C
2B
2A
3ft
6in
2D
2B
Measurement is
only correct if
corner is square
6in
3ft
5ft
FIBERONFENCING.COM
Please contact 1-800-215-2740 for further assistance.