Installation Guide

NOTE: Face Mounting the backer rails makes the installation of each picket style much easier. There is no fitting a fixed
number of pickets between the posts, just remember to cover each of the rail seams with some portion of a picket during
installation.
NOTE: For sloping landscape, angle cut rail ends.
STAPLES
Holding the staple gun sideways, shoots 4 staples in a box pattern in each “picket and cross rail
intersection” so the staples hide vertically in the grain of the picket. To prevent staple buckling when
fired into pickets, go slow, push the staple gun firmly and make sure the fence panel is not bouncing
back towards the gun. Shorter 1 1/4 in., 16 gauge staples are also used frequently in low-temperature
installation to help prevent staple buckling. Set air-compressor to 90-100 PSI.
Picket Installation
FIBERONFENCING.COM
Please contact 1-800-215-2740 for further assistance.
Staple Pattern