Installation Guide

NOTE: For sloping landscape, step brackets down.
STAPLES
Holding the staple gun sideways, shoots 3 staples into each “picket and cross rail intersection” so the
staples hide vertically in the grain of the picket. To prevent staple buckling when fired into pickets, go
slow, push the staple gun firmly and make sure the fence panel is not bouncing back towards the gun.
Shorter 1 1/4 in., 16 gauge staples are also used frequently in low-temperature installation to help
prevent staple buckling. Set air-compressor to 90-100 PSI.
48 in.
42 in.
3 Rail2 Rail
40 in.
24 in.
10 in.10 in.
Ground
32 in.
Cross Rail Installation
Picket Installation
FIBERONFENCING.COM
Please contact 1-800-215-2740 for further assistance.
Staple Pattern