Instructions / Assembly

5
AA
4
Pre-Installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A Pole 1
Installation
1
Attaching the cross bar to the
outlet box
Attaching the chain
□ Remove ring (DD) and screw collar loop (CC) from
preassembled threaded nipple on cross bar (AA).
□ Mount the cross bar (AA) to the outlet box using the two
outlet box screws (BB).
□ Attach screw collar loop (CC) to the threaded nipple of
cross bar (AA). Choose the desired length of chain (EE), using a
soft cloth and pliers (none included) to avoid damaging the nish
of chain (EE) if any links are being removed.
□ Open the top section of the chain (EE) and attach it to the screw
collar loop (CC). Pass the chain (EE) through canopy (FF) and
ring (DD).
□ Then weave the xture cord from xture (B) through the
chain (EE), ring (DD), canopy (FF), screw collar loop (CC) and
the threaded nipple on cross bar (AA).
3
2
Adjusting the length of cord if desired
BB
C
AA
CC
FF
DD
EE
NOTE: The top and bottom section of chain (EE) are
required.
HH
A
B
C
B Fixture 1
□ If the different cord length is desired, loosen the
screws (C) using the athead screwdriver(not included)
then move down or up the cord to your desired length,
secure back the screws (C).
C Screw 2