Data Sheet
XI-2017, www.findernet.com
14
I
12 SERIES
Time switches 16A
12
SERIES
Outline drawings
12.61 / 12.A1
Screw terminal
12.62 / 12.A2
Screw terminal
Battery replacement type 12.51, 12.61, 12.62, 12.81, 12.A1, 12.A2
Power-save mode
If the 230VAC supply is not connected, the time switch enters power-save mode: only the clock is
maintained active whilst the display turns off so as to guarantee a long life for the built-in back-up battery.
With a press to the joystick it is possible to “awake” the device and enter Display mode (with the “plug” symbol
displayed). A further press to
will enter the program or set-up mode as explained in the Display mode
section above.
After about 1 minute of inactivity the power-save mode will start again. During program or set-up the current
absorption is higher than in power-save mode, thus influencing the battery life.
In this mode the display back-light is not active. It is activated following a press to the joystick only with the
230VAC supply connected, but after about 1 minute of inactivity the display back-light will turn off, and to
activate it again it is necessary to press the joystick again.
Note: the output relay only functions if the power supply is connected.
Accessories type 12.51, 12.61, 12.62, 12.81, 12.A1, 12.A2
011.01
Adaptor for panel mounting, 35mm wide 011.01
Please see general technical information