Electronic step, call/reset and monostable relays W/C Call and reset switches for bathrooms Bathroom lighting control Bedroom light control Living room light control 13 SЕRIES Office lighting control
FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage to persons or property, caused as a result of the incorrect use or application of its products.
13 SERIES Electronic step relays 10 - 16 A 13 SERIES 13.81 - Electronic step relay - Rail mount - 1 Pole 13.81 13.91 13.91 - Electronic step relay and timing step relay Switch box mount - 1 Pole • Fixed time (10 minutes) timing function selectable (13.
13 SERIES 13 SERIES Electronic step/monostable relays 16 A 13.01 13.01 - Electronic step/monostable relay Rail mount - 1 Pole 13.61.0.024.0000 13.61.8.230.0000 13.61 - Multifunction step/monostable relay with reset command - Rail mount 1 Pole • Selectable Step or Monostable operation (13.01) • Multifunction (Step, Timing step, Monostable, Light ON) (13.61) • Reset feature, for centralized off command (13.61) • Set feature, for centralized on command (13.61.0.
13 SERIES Electronic call/reset relays and monostable relays 8 - 12 A 13.11 - Call & Reset Relay - Rail mount - 1 Pole 13.11 13 SERIES 13.12 13.31 13.12 - Call & Reset Relay - Rail mount - 2 Pole 13.31 - Electromechanical monostable relay Switch box mount - 1 Pole • Call relay with reset command suitable for • • • residential and commercial applications: public bathroom, hospital, hotel (type 13.11/13.
13 SERIES 13 SERIES YESLY Multifunction Electronic Relays 13.22 Multifunction electronic relay with Bluetooth 13.72 13.S2 13.22 - Electronic multifunction relay 2 contacts --Round wall box (ie: 0 60 mm) mounting --20 available functions (step relays, timer, staircase timer) for lighting and fan motor control 13.
13 SERIES Electronic step/monostable and call/reset 13 SERIES Ordering information Example: Multifunction relay with YESLY Bluetooth, 2 contacts 6 A NO (SPST-NO), 230 V AC supply. 1 3 . 7 A B C D 2 . 8 . 2 3 0 . B 0 0 0 Series Type 0 = Step/Monostable, 35 mm rail (EN 60715) mount, 35 mm wide 1 = Call & Reset relay, 35 mm rail (EN 60715) mount, 17.
13 SERIES Electronic step/monostable and call/reset 13 SERIES Functions for types 13.01, 13.11, 13.12, 13.81, 13.91 Type 13.01 Functions Monostable On closure of a switch between terminals (B2-B3) the output contact will close, and remain so, until the switch opens. Step relay (bistable) After every impulse (B1-B2), the output contact changes state alternately switching from open to closed and vice versa. 13.11 13.
13 SERIES Electronic step/monostable and call/reset 13 SERIES Functions for type 13.61 Type 13.61.8.230 Functions (RM) Monostable On closure of a switch between terminal 3 and Line (or Neutral, in case of 3-wire connection) the output contact will close, and remain so, until the switch opens. (IT) Timing step relay On initial impulse the output contact closes and timing starts for the pre-set duration T; On expiry of the time delay, the output contact opens.
13 SERIES 13 SERIES YESLY Multifunction Electronic Relays Functions for type 13.22, 13.S2, 13.72 Relay settings Multifunction electronic relays can be configured with the Finder TOOLBOX App, available for iOS or Android systems. This product is ready-to-use preset with the factory setting (RI) Step relay on both channels. Type Functions (RM) Monostable relay. 13.22 On closure of the switch the output will close, and remain so, 13.72 until the switch opens. (RI) Step relay.
13 SERIES YESLY Multifunction Electronic Relays 13 SERIES Functions for type 13.22, 13.S2, 13.72 Type 13.22 13.72 Functions (IT) Timing step relay. On initial impulse the output contact closes and timing starts. On expiry of the time delay, the output contact opens. During the timing period it is possible to immediately open the contact with a further impulse. (IP) Timing step relay with switch off early warning. On initial impulse the output contact closes and timing starts.
13 SERIES 13 SERIES Electronic step/monostable and call/reset Wiring diagrams (13.01, 13.11, 13.12 and 13.31) Type 13.01 Step wiring diagram Type 13.01 Monostable wiring diagram Red LED indication: Continuous = relay ON Red LED indication: Continuous = relay ON Type 13.11 Call & reset relay Type 13.12 Call & reset relay Reset Reset Set Set Type 13.31 Connection V-2019, www.findernet.
SERIES Electronic step/monostable and call/reset 13 SERIES Wiring diagrams (13.61) Type 13.61.8.230 3 wire connection Red LED indication: Continuous = relay ON Blinking = relay OFF Type 13.61.8.230 4 wire connection Red LED indication: Continuous = relay ON Blinking = relay OFF Reset Reset Maximum 10 (≤ 1 mA) illuminated push buttons Type 13.61.0.
13 SERIES Electronic step relays 13 SERIES Wiring diagrams (13.81, 13.91, 13.22 and 13.S2) Type 13.81 3 wire connection Red LED indication: a Continuous = relay ON Blinking = relay OFF L Type 13.81 4 wire connection Red LED indication: Continuous = relay ON Blinking = relay OFF L N N Maximum 15 (≤ 1 mA) illuminated push buttons Type 13.91 3 wire connection L Maximum 15 (≤ 1 mA) illuminated push buttons Type 13.91 4 wire connection L N N Maximum 12 (≤ 1 mA) illuminated push buttons Type 13.
13 SERIES YESLY Multifunction Electronic Relays 13 SERIES Wiring diagrams (13.72) Type 13.72 4 wire connection L N Maximum 5 (≤ 1 mA) illuminated push buttons Examples of applications Function TP - Roller Blinds, Shutters and Curtains Type 13.S2 Type 13.72 LL N N Ch1-P1: up Ch2-P2: down LL N N Ch1-P1: up Ch2-P2: down Function VB – Bathroom light + fan Type 13.22 Type 13.72 LL N N V-2019, www.findernet.com Type 13.72 LL N N LL N K Function CP – Ringbell + Lights Type 13.
13 SERIES 13 SERIES Electronic step relays Outline drawings Type 13.11 Screw terminal 45 56.5 84 4.3 30.5 88.8 17.5 33.8 Type 13.01 Screw terminal Type 13.12 Screw terminal Types 13.31/13.91 Screw terminal Type 13.61 Screw terminal Type 13.81 Screw terminal V-2019, www.findernet.
13 SERIES Electronic step relays 13 SERIES Outline drawings Type 13.72 Screw terminal Type 13.22 / 13.S2 Screw terminal Accessories Adaptor for panel mounting, for type 13.01, 35 mm wide 011.01 Adaptor for panel mounting, for type 13.11, 13.12, 13.61 and 13.81, 17.5 mm wide 020.01 Sheet of marker tags (CEMBRE Thermal transfer printers) for relays types 13.11, 13.12, 13.61 and 13.81 (48 tags), 6 x 12 mm 060.48 011.01 020.01 060.48 V-2019, www.findernet.