Datasheet

ManualsBrandsFINDER ManualsTime Switches & Multifunction Relays- 16A Monofunction Modular Timer SPDT-CO IP20

Multi-function and mono-function timer range

80.01 - Multi-function & multi-voltage

80.11 - On-delay, multi-voltage

• 17.5mm wide

• Six time scales from 0.1s to 24h

• High input/output isolation

• 35mm rail (EN60715) mount

• “Blade + cross” - both flat blade and cross head

screw drivers can be used to adjust the range

and function selectors, the timing trimmer, and

to disengage the rail mounting clip

• New multi-voltage versions with “PWM clever”

technology

80.01 / 80.11

Screw terminal

80.01 80.11

• Multi-voltage

• Multi-function

• Multi-voltage

• Mono-function

AI: On-delay

DI: Interval

SW: Symmetrical flasher (starting pulse on)

BE: Off-delay with control signal

CE: On- and off-delay with control signal

DE: Interval with control signal on

AI: On-delay

Wiring diagram

(without control signal)

Wiring diagram

(with control signal)

Wiring diagram

(without control signal)

For UL ratings see:

“General technical information” page V

For outline drawing see page 6

Contact specification

Contact configuration 1 CO (SPDT) 1 CO (SPDT)

Rated current/Maximum peak current A 16/30 16/30

Rated voltage/

Maximum switching voltage VAC 250/400 250/400

Rated load AC1 VA 4000 4000

Rated load AC15 (230VAC) VA 750 750

Single phase motor rating (230VAC) kW 0.55 0.55

Breaking capacity DC1: 30/110/220 V A 16/0.3/0.12 16/0.3/0.12

Minimum switching load mW (V/mA) 500 (10/5) 500 (10/5)

Standard contact material AgNi AgNi

Supply specification

Nominal voltage (U

) VAC (50/60Hz) 12…240 24…240

VDC 12…240 24…240

Rated power AC/DC VA (50Hz)/W <1.8/<1 <1.8/<1

Operating range VAC 10.8…265 16.8…265

VDC 10.8…265 16.8…265

Technical data

Specified time range (0.1…2)s, (1…20)s, (0.1…2)min, (1…20)min, (0.1…2)h, (1…24)h

Repeatability % ±1 ±1

Recovery time ms 100 100

Minimum control impulse ms 50 —

Setting accuracy-full range % ±5 ±5

Electrical life at rated load in AC1 cycles 50·10

50·10

Ambient temperature range °C –10…+50 –10…+50

Protection category IP 20 IP 20

Approvals (according to type)

II-2016, www.findernet.com

SERIES

80 SERIES

Modular timers 16A

Summary of content (8 pages)

PAGE 1
80 SERIES Modular timers 16 A 80 SERIES 80.01 Multi-function and mono-function timer range 80.11 80.01 - Multi-function & multi-voltage 80.11 - On-delay, multi-voltage • 17.5 mm wide • Six time scales from 0.
PAGE 2
80 SERIES 80 SERIES Modular timers 16 A 80.21 Mono-function timer range 80.41 80.91 80.21 - Interval, multi-voltage 80.41 - Off-delay with control signal, multi-voltage 80.91 - Asymmetrical flasher, multi-voltage • 17.5 mm wide • Six time scales from 0.
PAGE 3
80 SERIES Modular Solid State timer (SST) 1 A 80 SERIES 80.71 Multi-function and multi-voltage solid-state output timer • 17.5 mm wide • Six time scales from 0.
PAGE 4
80 SERIES 80 SERIES Modular timers 6 - 8 A 80.61 Mono-function timer range 80.82 80.61 - Power off-delay (True off-delay), multi-voltage 80.82 - Star-delta, multi-voltage • 17.5 mm wide • Rotary range selector, and timing trimmer • Four time scales from 0.05s to 3 min (type 80.61) • Six time scales from 0.1 s to 20min (type 80.82) • High input/output isolation • 35 mm rail (EN 60715) mount 80.61 / 80.
PAGE 5
80 SERIES Modular timers 1 - 6 - 8 - 16 A 80 SERIES Ordering information Example: 80 series, modular timers, 1 CO (SPDT) - 16 A, supply rated at (12…240)V AC/DC. 8 0 . 0 1 . 0 . 2 4 0 .
PAGE 6
80 SERIES 80 SERIES Modular timers 1 - 6 - 8 - 16 A Outline drawings 80.01 Screw terminal 80.11 Screw terminal 80.21 Screw terminal 80.41 Screw terminal 80.91 Screw terminal 80.71 Screw terminal 80.61 Screw terminal 80.82 Screw terminal II-2016, www.findernet.
PAGE 7
80 SERIES Modular timers 1 - 6 - 8 - 16 A 80 SERIES Functions U = Supply voltage LED* S = Signal switch Contacts Supply voltage NO output contact Open Closed OFF Open 15 - 18 15 - 16 ON Open 15 - 18 15 - 16 ON Open (Timing in Progress) 15 - 18 15 - 16 ON Closed 15 - 16 15 - 18 = Output contact * The LED on type 80.61 is illuminated only when the supply voltage is applied to the timer; during the timing period the LED is not illuminated.
PAGE 8
0 SERIES 80 SERIES Modular timers 6 - 8 - 16 A Functions Wiring diagram Without control signal Type 80.11 (AI) On-delay. Apply power to timer. Output contacts transfer after preset time has elapsed. Reset occurs when power is removed. 80.21 (DI) Interval. Apply power to timer. Output contacts transfer immediately. After the preset time has elapsed, contacts reset. 80.61 (BI) Power off-delay (True off-delay). Apply power to timer (minimum 500 ms). Output contacts transfer immediately.