55S8060 colour television owner’s manual
Contents Package Contents .................................................. 3 Features ................................................................. 3 Introduction ............................................................. 4 Preparation ............................................................. 4 Safety Precautions ................................................. 4 Power Source ..................................................... 4 Power Cord ....................................................
Configuring Language Preferences ...................... 33 Parental Control.................................................... 34 Parental Settings Menu Operation (*) ............... 34 Timers ................................................................... 34 Setting Sleep Timer .......................................... 34 Setting Programme Timers ............................... 34 Adding a Timer .............................................. 34 Editing a Timer ........................................
Package Contents Features • Remote controlled colour LED TV. • Fully integrated Terrestrial digital TV (DVB-T MPEG2) (DVB-T MPEG4). • 4 HDMI connectors. SCREEN EPG 1 4 GHI 7 PQRS SOURCE • 2 USB inputs. Batteries: 2 X AAA INTERNET LANG SUBTITLE TEXT FAV 2 ABC 5 JKL 8 TUV 0 • Programme recording. • Programme timeshifting. PRESETS SLEEP 3 • 10.000 programmes. 6 • On Screen Display (OSD) menu system. 9 • 2 Scart sockets. DEF MNO WXYZ SWAP • Teletext, Fastext, TOP text.
Introduction Safety Precautions Thank you for choosing this product. This manual will guide you through the proper operation of your TV. Before operating the TV, please read this manual thoroughly. Please keep this manual in a safe place for future reference. This device is intended to receive and display TV programmes. The different connection options make an additional expansion of the reception and display sources possible (receiver, DVD player, DVD recorder, VCR, PC etc.).
Lightning Headphone Volume In case of a storm and lightning or when going on holiday, disconnect the power cord from the wall outlet. Excessive sound pressure from earphones and headphones can cause hearing loss. Replacement Parts To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available).
The Standby / On button does not fully switch off this product. Moreover, the device continues to consume power in standby mode. In order to separate the device completely from mains, the mains plug has to be pulled from the mains socket. Because of that the device should be set up in a way, that an unobstructed access to mains socket is guaranteed, so that in case of emergency the mains plug can be pulled immediately.
Environmental Information • This television is designed to consume less energy to save environment. You not only help to save the environment but you can also save money by reducing electricity bills thanks to the energy efficiency features of this TV. To reduce energy consumption, you should take the following steps: • You can use the Power Save Mode setting, located in the Picture Settings menu.
Remote Control Buttons 1. Activate Portal mode (*) 2. Play (in Media Browser mode) 3. Programme recording 4. Fast rewind (in Media Browser mode) INTERNET 5. No function 6. Mono/Stereo - Dual I-II / Current Language (*) / Play preview (in Media Browser mode) 7. Image size SUBTITLE LANG SCREEN 8. Teletext / Mix EPG TEXT PRESETS FAV SLEEP 9. Electronic Programme Guide 1 10. Numeric buttons 11. AV / Source 12. Menu on/off 4 13. Programme Down - Page up / Programme Up Page down GHI 14.
LED TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby/On button 2. TV/AV button 3. Programme Up/Down buttons 4. Volume Up/Down buttons Standby-LED ” and Note: Press “ buttons at the same time to view main menu. Viewing the Connections - Back Connectors 12 1 3 1. EXT 2 inputs or outputs for external devices. 2. EXT 1 inputs or outputs for external devices.
4. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects to the TV via YPbPr. Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of your PC to enable PC audio. Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device to enable component audio. 5. Subwoofer Out is for connecting an external, active subwoofer to the set to give a much deeper bass effect.
Aerial Connection First Time Installation • Connect the aerial TV plug to the AERIAL INPUT socket located at the rear of the TV. IMPORTANT: Ensure that the aerial is connected and a Common Interface module is not inserted before switching on the TV for the first time installation. Do not insert a common interface module during the search process. 1 3 • When the TV is operated for the first time, the installation wizard will guide you through the process.
You can set Scan Encrypted as Yes if you want to scan coded stations. • You can activate Store mode option by using “ ” or “ ” button. If the Store mode is set to “enabled”, Store mode option will be available in other settings menu. If it is set to “disabled”, Store mode will not be available after the First Time Installation.
Connecting to a DVD Player If you want to connect a DVD player to your LED TV, you can use various connections. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections. Note: Cables shown in the illustration are not supplied. • If your DVD player has a HDMI socket, you can connect via HDMI. When you connect to the DVD player as illustrated below, switch to HDMI source.
Using Side AV Connectors USB Memory Connection You can connect a range of optional equipment to your LED TV using side connectors of the TV. • For connecting a camcorder or camera , you should use AV socket (side). To do this, you must use the supplied video/audio connection cable. First, plug single jack of the cable to the TV’s AV IN socket (side). Afterwards, insert your camera cable’s (not supplied) connectors into the plural part of the video/ audio connection cable.
CAUTION ! • Quickly plugging and unplugging USB devices, is a very hazardous operation. Do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player or the USB device itself. • Do not pull out USB device while playing or recording a file. Programme Recording To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature.
Connecting to a Wired Network (optional) For connecting to a wired LAN network, you should perform the following steps: • Connect a broadband ISP connection ethernet cable to the ETHERNET INPUT of your modem. • Ensure that Nero Media Home software is installed to your PC. (for DLNA function) • Afterwards, you should connect your PC to the one of your modem’s LAN connectors (e.g. LAN 1) by using a proper LAN cable. • Use another LAN output of your modem (e.g. LAN 2) to enable the connection to your TV.
Connecting to a Wireless Network (Optional) IMPORTANT: “Veezy 100” USB dongle is required to use wireless network feature. To use your TV with your wireless network, you need a “Veezy 100” Wireless USB dongle. To make your modem’ s SSID visible, you should change your SSID settings via modem’s software. The TV cannot connect to the networks with hidden SSID.
Volume Setting Input Selection Once you have connected external systems to your TV, you can switch to different input sources. Press the “SOURCE” button on your remote control consecutively for directly changing sources. • Press “V ” button to increase the volume. Press “V ” button to decrease the volume. A volume level scale (slider) will be displayed on the screen. Programme Selection (Previous or Next Programme) • Press “ CH programme. ” button to select the previous • Press “CH programme.
Yellow button (Zoom): Expands programme information. EPG Now and Next Menu Blue button (Filter): Views filtering options. INFO (Event Details): Displays the programmes in detail. Numeric buttons (Jump): Jumps to the preferred channel directly via numeric buttons. OK (Options): views/records or sets timer for future programs. Text (Search): Displays “Guide Search” menu. SUBTTL: Press SUBTITLE button to view Select Genre menu.
Record / Delete Record Timer Auto Channel Scan Menu Operation IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable the recording feature. Otherwise, the recording feature will not be available. Digital Aerial: Searches and stores aerial DVB stations. • After you have selected a programme in EPG menu, press the OK button and and Options screen will be displayed.
Clear Service List (*) Analogue Manual Search (*) This setting is visible only when the Country option is set to Denmark, Sweden, Norway or Finland. Use this setting to clear channels stored. Press “ ” or “ ” button to select Clear Service List and then press OK. The following OSD will be displayed on the screen: After selecting search type as analogue, you can use “ ”/“ ” button to highlight an item and then press “ ” or “ ” button to set an option.
Operating the Channel List Locking a Channel You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag a single channel. • Select the channel that you want to lock and select Lock option. Press OK button to continue. • You will be asked to enter parental control PIN. Default PIN is set as 0000. Enter the PIN number. • Press “ ” or “ ” button to select the channel that will be processed. Press “ ” or “ ” button to select a function on Channel List menu.
Managing Stations: Sorting Channel List Media Playback Using Media Browser You can select broadcasts to be listed in the channel list. To display specific types of broadcast, you should use Active Channel List setting. Select Active Channel List from the Channel list menu by using “ ” or “ ” button. Press OK button to continue. If the USB stick is not recognized after power off/on or First Time Installation, first, plug the USB device out and power off/on the TV set. Plug the USB device in again.
Select a device by using “ ” or “ ” button and press OK. Press RETURN button to switch back to previous menu. Viewing Videos via USB Viewing Photos via USB When you select Photos from the main options, available image files will be filtered and listed on this screen. When you select Videos from the main options, available video files will be filtered and listed on this screen. You can use “ ” or “ ” button to select a video file and press OK button to play a video.
Rotate (Up/Down buttons): Rotates the image using up/down buttons. Media Browser Settings Loop/Shuffle (GREEN button): Press once to disable Loop. Press again to disable both Loop and Shuffle. Press once more to enable only Shuffle. Press again to enable all. You can follow the disabled functions with the change of the icons. BACK: Back to file list. INFO: Displays help screen.
Using DLNA Network Service Information DLNA (Digital Living Network Alliance) is a standard that eases the viewing process of digital electronics and makes them more convenient to use on a home network. For further information, visit www.dlna.org. The DLNA standard allows you to view and play photos, music and videos stored in the DLNA media server connected to your home network. Step 1: Nero Media Home Installation The DLNA function cannot be used if the server program is not installed to your PC.
• If available networks are found, they will be listed on this screen. • Select media server or network that you want to connect by using “ ” or “ ” buttons and press OK button. • If you select media type as Video and choose a device from the selection menu, a new menu screen will appear on the screen as below: Timeshift Recording IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable the recording feature.
Instant Recording IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable the recording feature. Otherwise, the recording feature will not be available. • Press (RECORD) button to start recording an event instantly while watching a programme. The following OSD appears on the screen: Watching Recorded Programmes In the main menu, use “ ” or “ ” buttons to select Media Browser.
14:9 Changing Image Size: Picture Formats • Programmes can be watched in different picture formats, depending on the transmission received. This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. • You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes. • Press “ SCREEN” button repeatedly to change the image size. Available zoom modes are listed below.
Advanced Settings Configuring Picture Settings You can use different picture settings in detail. Press “MENU” button and select the Picture icon by using “ ” or “ ” button. Press OK button to view Picture Settings menu. Dynamic Contrast: You can change contrast rate by using dynamic contrast function. Dynamic contrast can be set to one of these options: Low, Medium, High or Off Operating Picture Settings Menu Items • Press “ ” or “ ” button to highlight a menu item.
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in PC mode. PC Picture Settings For adjusting PC picture items, do the following: Press “ ” or “ ” button to select Picture icon. Picture menu appears on the screen. Configuring Sound Settings Sound settings can be configured according to your personal preferences. Press “MENU” button and select the Sound icon by using “ ” or “ ” button.
Note: Equalizer menu settings can be changed manually only when the Equalizer Mode is in User. Sources: Enables or disables selected source options. Balance: This setting is used for emphasizing left or right speaker balance. Network Settings: Displays Network Settings screen. Headphone: Sets headphone volume. Other Settings: Displays other setting options of the TV set. Sound Mode: You can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel supports that mode.
Note: If the Country option is set to Denmark, Sweden, Norway or Finland, the Language Settings menu will function as described below: Configuring Language Preferences You can operate the TV’s language settings using this menu. Language Settings Press “MENU” button and select the Settings icon by using “ ” or “ ” button. Press OK button to view Settings menu.
Parental Control To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system. This function enables or disables the menu protection system and allows the PIN code to be changed. Press “MENU” button and select the Settings by using “ ” or “ ” button. Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Parental and press OK to continue: To display parental lock menu options, PIN number should be entered.
End: Enter an ending time using the numeric buttons. (*) Available only for EU country options. Duration: Displays duration between the starting and ending time. You set recording timer’s starting time to start later by using this setting. Repeat: Sets a timer to be repeated as Once, Daily or Weekly. Use “ ” or “ ” buttons to select an option. (*) Available only for EU country options. Change/Delete: Sets the change/delete permission.
• Use “ ” or “ ” buttons to highlight Date/Time. Date, Time, Time Settings Mode and Time Zone Setting will be available. Use “ ” or “ ” buttons to highlight the Time Settings Mode. Time Settings Mode is set using “ ” or “ ” buttons. It can be set to AUTO or MANUAL. When AUTO is selected, Date/Time and Time Zone options will not be available to be set. If MANUAL option is selected as the Time Zone can be altered: • By pressing “ ” or “ ” buttons select Time Zone.
Wi-Fi Settings (Optional) Wi-Fi feature can be used for a wireless network connection (optional). The feature is used for infrastructure purposes only, such as connecting to the web, hbb sites and connecting with DLNA servers (optional). Select Wireless Device option to switch to Wireless Settings from Network Settings window. You can navigate between menu tabs by pressing left/ right buttons. The help bar on the bottom of the dialog shows features that you may use.
Configuring Other Settings To view general configuration preferences, select Other Settings in the Settings menu and press OK button. You can enable or disable automatic upgrade by setting Automatic Scanning option. You can manually search for new software by selecting Scan for upgrade. Hard of Hearing: If the broadcaster enables any special signal concerning the audio, you can set this setting as On to receive such signals.
Displaying Subtitles: You can enable subtitles by pressing the SUBTITLE button of the remote control. Press SUBTITLE button again to disable subtitle function. If “Subtitle” is On, pressing the “TEXT” button causes the following warning message to be displayed on the screen (** for UK only) Analogue Teletext The teletext system transmits information such as news, sports and weather on your TV.
Tips Screen Care: Clean the screen with a dry, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety, unplug the mains plug when cleaning the set. When moving the TV, hold it properly from the bottom part. Image Persistence: Please note that ghosting may occur while displaying a persistent image. LED TVs’ image persistence may disappear after a short time. Try turning off the TV for a while.
Appendix A: INTERNET PORTAL You can access the PORTAL mode using your TV. To do this, an active internet connection is required. Follow the steps on Connecting to a Wired/Wireless(optional) Network section to connect your TV to the internet. After the connection is established, you can select or view portal options. Note: A Broadband internet connection is required for high quality viewing.
Appendix B: BBC iPlayer Launch You can access BBC iPlayer using your TV. To do this, an active internet connection is required. Follow the steps on Connecting to a Wired/Wireless(optional) Network section to connect your TV to internet. After the connection is established, you can launch BBC iPlayer. Note: Broadband internet connection (minumum 2mbps) is required for high quality viewing.
Appendix C: PC Input Typical Display Modes The display has a maximum resolution of 1920 x 1200. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD should appear on the screen giving you 15 seconds to change back to your last setting. Different graphics card and drivers allow for variable resolution support.
Appendix D: AV and HDMI Signal Compatibility (Input Signal Types) Source EXT-1 EXT-2 FAV (SIDE AV) YPbPr HDMI1 HDMI2 HDMI3 HDMI4 Supported Signals Available PAL 50/60 O NTSC 60 O RGB 50 O RGB 60 O PAL 50/60 O NTSC 60 O RGB 50 X RGB 60 X PAL 50/60 O NTSC 60 O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 1080P 50Hz O 1080P 60Hz O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz
Appendix E: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information.
Appendix G: Software Upgrade • Your TV is capable of finding and updating new software upgrades over broadcast channels. • For broadcast channels search, theTV looks at the available channels stored in your settings. So before the software upgrade search, it is advised to auto search and update all available channels. 1) Software upgrade search via user interface • It is possible to manually check if there is a new software upgrade for your TV set. • Simply navigate on your main menu.
Appendix H: Nero MediaHome Installation To install Nero MediaHome, please proceed as follows: Note: To use the DLNA function, this software should be installed to your PC. 1. Insert the Nero MediaHome installation disc in your optical disc drive. • The Nero MultiInstaller screen with a button to start the installation process will open automatically. • If below window is not displayed automatically, double-click on the file SetupX located on 4. Click the Next button. the Nero MediaHome installation disc.
7. Use Typical installation and click the Next button. 10. Installation finishes. • The Prerequisites screen is displayed. The Nero MediaHome installation wizard checks the availability of required third-party software on your PC. If applications are missing they are listed and must be installed before continuing installation. The Help us to Enhance Nero Software screen is displayed.
14. Run Nero MediaHome by pressing shortcut icon. • Click ADD icon from LOCAL FOLDERS to add the folder you want to share with the network. Select the folder that you want to share and click START SERVER. 15. You can display all media types from the library. Click Refresh icon to refresh. Click STOP SERVER icon to stop server. English - 49 - Customer Helpline 0845 459 5282 01_[GB]_MB70_5112UK_IDTV_T_DLNA_MMH_IPLAYER_100Hz_55935LED_GOLD11_10077405_50216315.indd 49 23.02.
Specifications Digital Reception (DVB-T) TV BROADCASTING Transmission Standards: PAL/SECAM B/G D/K K’ I/I’ L/L’ DVB-T, MPEG2,DVB-T, MPEG4 HD RECEIVING CHANNELS i. DEMODULATION VHF (BAND I/III) • -Symbol rate: COFDM with 2K/8K FFT mode. UHF (BAND U) • -Modulation: 16-QAM - 64-QAM FEC for all DVB modes (automatically found) HYPERBAND NUMBER OF PRESET CHANNELS 10.000 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50 Hz.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.
50216315 www.finluxdirect.
