Contents Environmental Information ..................................... 2 (Input Signal Types)............................................... 20 Accessories included............................................... 3 Appendix D: Supported File Formats for USB Media Browser................................................................. 21 TV - Features ......................................................... 3 Safety Precautions and Important Information........ 3 Viewing the TV .......................
Power cord and plug Screen • The power cord plug should be easily accessible. If there is lightning or storms, or if the TV is not going to be used for a while (e.g. if going away on holiday), disconnect the TV set from the mains. • Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green or red point. Please note that this does not affect the performance of your product. • Do not place the TV, furniture, etc. on the power cord or pinch the cord.
Accessories included Safety Precautions and Important Information Remote Control Batteries: 2 x AAA Please read these instructions fully before installing or operating. Instruction Book Side AV Connection Cable Preparation 3D Glasses x 8 TV - Features • 3D Viewing: This product supports the viewing of 3D content from devices such as a High Definition Satellite Receiver or Blu-ray Player via the HDMI input.
Viewing the TV Operation with the Buttons on the TV Press button to decrease the volume or button to increase the volume, so a volume level scale (slider) will be displayed on the screen. Press P/CH + button to select the next programme or P/CH - button to select the previous programme. Press the or button at the same time to view the main menu. In the Main menu select a sub-menu using TV/AV button and set the sub-menu using or buttons.
Remote Control 1. Standby / On 2. Channel list 3. Volume up-down 4. Menu on/off 5. OK / Channel list / Confirm 6. Return / Back 7. No function 8. My button 1 (*) 9. My button 2 (**) 10. Coloured buttons (Red, Green, Yellow, Blue) TV 11. Mono-Stereo Dual I-II / Current language 12. Fast rewind (in media browser mode) 13. Pause (in media browser mode) / Timeshift recording 14. Programme recording 15. Play (in media browser mode) 16. Stop (in media browser mode) 17.
Connections Connector Type Cables Device Scart Connection (back) AUDIO L&R VGA Connection (back) PC/YPbPr Audio Connection (back) HDMI Connection (back & side) S/PDIF Optical Out (back) HEADPHONE Side AV Connection (side) Headphone Connection (side) YPBPR SIDE AV S/PDIF YPbPr Video Connection (back) AV Connection Cable (supplied) USB Connection (side) CI Connection (side) CAM module Subwoofer Connection (back) NOTE: When connecting a device via the YPbPr or Side AV input, you must use the s
Inserting the Batteries into the Remote Control 1. Lift the cover on the back of the remote upward gently. 2. Install two AAA batteries. Make sure to match the + and - ends of the batteries in the battery compartment (observe the correct polarity). First Time Installation When turned on for the first time, the “language selection” menu appears. The message “Welcome please select your language!” is displayed and all language options are listed alphabetically. 3. Replace the cover.
displayed after selecting the Store Mode. Select YES to proceed. If Home Mode is selected, Store mode will not be available after the First Time Installation. Press OK button on the remote control to continue and the following message will be displayed on the screen. You must select YES to search and store broadcasts. The television will search for digital terrestrial TV broadcasts.
You can set your Media Browser preferences by using the Settings menu. Changing Image Size: Picture Formats Programmes can be watched in different picture formats, depending on the transmission received. You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes. Press the “ SCREEN” button repeatedly to change the image size. You can shift the screen up or down by using “ ” or “ ” buttons while in 14:9 Zoom, Cinema or Subtitle.
Menu Features and Functions Picture Menu Contents 3D Settings Press to view 3D settings. Mode You can change the picture mode to suit your preference or requirements. The Picture mode can be set to one of these options: Cinema, Game, Sport, Dynamic and Natural. Contrast Sets the lightness and darkness values of the screen. Brightness Sets the brightness value for the screen. Sharpness Sets the sharpness value for the objects displayed on the screen.
Menu Features and Functions Advanced Settings Dot Clock (in PC mode) Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Phase (in PC mode) Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by using trial and error.
Menu Features and Functions Settings Menu Contents Conditional Access Controls conditional access modules when available. Language Configures language settings. Parental Configures parental settings.(Default PIN code can change depending on the selected country.If you are asked to enter a PIN code for viewing a menu option, use one of the following codes: 4725, 0000 or 1234.) Timers Sets timers for selected programmes. (USB Record) Recording Configuration Displays the recording configuration menu.
Electronic Programme Guide (EPG) Some, but not all channels send information about the current and next programmes. Press the “ - EPG” button to view the EPG menu. Set Timer / Delete Timer After you have selected a programme in the EPG menu, press the OK button and the Options screen will be displayed. Select the “Set Timer on Event” option and press the OK button. You can set a timer for future programmes. To cancel an already set timer, highlight that programme and press the OK button.
Timeshift Recording Press (PAUSE) button while watching a broadcast to activate timeshifting mode. In timeshifting mode, the programme is paused and simultaneously recorded to the connected USB disk. Press (PLAY) button again to resume the paused programme from where you stopped. You will see the timeshift gap between the real and the timeshifted programme in the info bar. Instant Recording be available. You can use button to slow forward. Pressing button consecutively will change slow forwarding speed.
• Since the surface of the product is easily scratched, make sure you clean the product with a soft cloth. As the product may be scratched if there is any foreign material on the cloth, make sure to shake off any dust before using it. • Do not scratch the surface of the display screen with a sharp tool or clean it using chemicals. This may degrade the screen quality. • Do not apply force to the display screen. • Do not drop or bend the product.
• The 3D picture may not be visible or become distorted when watching under intense light conditions. • Connect a 3D compatible player via a “high speed” HDMI cable (required to watch 3D content). Refer to the players manual for settings. • Press the SOURCE button and select the connected input. • You should select a suitable 3D Mode before viewing. • To view 3D contents or programmes in 3D mode you must wear the supplied 3D Glasses.
Vertical Viewing Angle 3D Viewing Information Your 3D Viewing experience can be affected by the location of the viewer and the TV set. To maximise your enjoyment we recommend you follow the guidelines below: It is recommended to place the TV at the correct seated eye height of the viewer. If the TV must be placed higher or lower it should be tilted accordingly using suitable stand or wall mount.
DTV ATV OTHER 1080p@24 FP Not Supported Not Supported Not Supported 720p@50 FP Not Supported Not Supported Not Supported 720p@60 FP Not Supported Not Supported Not Supported 1080p FC SBS, TB Not Supported SBS, TB 720p FC SBS, TB Not Supported SBS, TB 1080i FC SBS Not Supported SBS OTHER (*) Not Supported Not Supported Software Upgrade Your TV is capable of finding and updating automatically via the Aerial signal or over the Internet.
Licence Notifications Manufactured under license from Dolby Laboratories. TRADEMARK ACKNOWLEDGMENT “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Appendix B: PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes. Your TV supports up to 1920x1200.
Appendix D: Supported File Formats for USB Media Browser Media Movie Extension Format Notes Video Audio dat, mpg, mpeg Mpeg1,2 MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM 1080P@ 30fps 50Mbit/sec dat, mpg, mpeg MPEG2 ,H.264, VC1, AVS, MVC MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM H.264:1080Px2@25fps 1080P@ 50fps MVC: 1080P@ 24fps Other: 1080P@ 30fps” 50Mbit/sec .vob MPEG2 MPEG1/2 Layer 1/2/3, AC3, LPCM 1080P@ 30fps 50Mbit/sec .
Appendix E: Supported DVI Resolutions When connecting devices to your TV’s connectors using DVI converter cable (not supplied), you can refer to the following resolution information. 24Hz 25Hz 30Hz 50Hz 480i 60Hz þ 480p þ 576i þ 576p þ 720p þ þ 1080i þ þ þ þ 1080p þ þ þ SKY Remote Control Code The Sky Code is 065: 1 Turn your TV on. 2 Press TV on your Sky remote control handset.
Consigne importante Pour votre sécurité, veuillez lire attentivement les consignes suivantes avant d’essayer de brancher ce produit à la source d’alimentation.
YEAR GUARANTEE WARRANTY CARD Thank you for your purchase. We are sure you will enjoy using Finlux for many years. The product warranty is for a period of twelve (12) months from the date of original purchase. Any defect caused by faulty materials or workmanship will be repaired free of charge where possible during this period by Finlux. If a repair is not possible, the product will be replaced free of charge or a refund will be given.
Warranty Exclusions A. This Warranty does not extend to loss (liquid ingression), theft, vermin or insect infestation. B.