SDS

Safety Data Sheet
OSHA/GHS 16-Section Standard Format, Complies with EC 1907/2006,1272/2008
an environmentally hazardous liquid, absorbed into a solid material but with no free liquid in the
packet or article, or containing less than 10 g of an environmentally hazardous solid, are not
subject to these Regulations. (IATA) Small inner packagings consisting of sealed packets or articles
containing less than 10 mL of a Packing Group II or III flammable liquid absorbed into a solid
material are not subject to these Regulations provided there is no free liquid in the packet or
article (IACAO) Mixtures of solids which are not subject to these Instructions and flammable
liquids may be transported under
this entry without first applying the classification criteria of Division 4.1, providing there is no free
liquid visible at the time the substance is packaged and the packaging must pass a leakproofness
test at the Packing Group II level. Small inner packagings consisting of sealed packets or articles
containing less than 10 mL of a Packing Group II or III flammable liquid absorbed into a solid
material are not subject to these Instructions provided there is no free liquid in the packet or
articles. (IMDG) Sealed packets containing 10 ml or less of Class 3 flammable liquids in Packing
Group II or III which are absorbed into a solid with no free liquid at the time of shipment are not
regulated.
SECTION 15: REGULATORY INFORMATION
EPA: SARA
CAS
Chemical
De Minimis
67-63-0
Isopropyl alcohol (only persons who manufacture by the
strong acid process are subject, no supplier notification)
1.0%
EC:
Directive 2010/75/EU (VOC): 60 - 80 % (Liquid)
SECTION 16: OTHER INFORMATION
Issue Date: Mar 26-2014
Revision Date: Jan 5-2021
Disclaimer:
The information provided in this SDS is correct and is to the best of our knowledge,
at the date of its publication. The information given is designed only as a guide for safe handling,
use, processing, storage, transportation, disposal and release and is not to be considered as a
warranty or quality specification. The information relates only to the specific material designated
and may not be valid for such material used in combination with any other material or in any
process, unless specified in the text.