Operation Manual

17
1.
2.
Detaching the Rower Belt
1. To detach belt, simply pull beyond the range of the normal rowing stroke until the
belt detaches from the belt bungee pulley.
Tip: You’ll hear the Velcro separating just before the belt detaches.
2. Unhook the Bungee Shock Cord from the Rear Brace. Then, push out the Inner Clip
from the Bungee Hook. Pull the Bungee through the Inner Clip until free. This will
allow for the Bungee Shock Cord to be threaded completely out of the Main Frame
and up to the Belt Bungee Pulley where it will be re-attached once the Rower Belt
is in the proper position.
Bungee Hook
Inner Clip