Installation Guide

2
2 PARTS SUPPLIED
Clamping brackets (4)
and screws (4)
CI122DTB only
Clamping brackets (2)
and screws (2)
Installing multiple products
●
Note: We recommend installing products in separate cutouts with a minimum distance of 3/16” (5mm) between the glass edges.
●
If installing multiple products adjacent to each other within the same cutout, a separate joining strip kit is required for installation.
●
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our website www.fisherpaykel.com.
●
If installing different products adjacent to each other (eg a wok burner next to an induction cooktop), the minimum clearance measurements for the different products may vary.
Always use the greater distance.
Foam tape (1)