,1) -189082 OD24D TALL clinical CALIGULA. NG 15/4/00 11:50:45 AM Installation instructions [ate oe Teen Fishers PayPal Ch negative ing Important! SAVE THESE INSTRUCTIONS this road on SAFETY AND WARNINGS WARNING! Electrical hazard Before installing the DishDrawer®, remove the house fuse or open the circuit breaker. i permanently connecting the Dishwasher, be sure the power is Isolated and the DishDrawer® unplugged. GROUNDING INSTRUCTIONS This appliance must be grounded.
| 11,2) 596HAAC DD24D TALL natl AZ LIRA. inced 15/4100 11:50:45 AM (Z) PRODUCT DIMENSIONS Product dimensions inches (mm) Perseid pail (3) CABINETRY DIMENSIONS height of lower dean 126" 312 of rascal Bracket sits He" 12) 12 36d" $312 min 808 2 “3 A 34-36 34-36 ¥ (854 -926,5) (64-926. 564-9126.
|B) 1 509HA2C, 0D24D TALL assailant GAUSS. inced 15/4/00 11:50:45 AM ® PARTS SUPPLIED Wire clip edd tog kick 113 1 black boss) hel Authorized Age Gy CAVITY PREPARATION Important! If no side partition, use a Be sure the edges of the services hole are smooth or covered. if the services brace for securing. hole is through a metal partition the hole must be protected with the Edge protector supplied to prevent damage to the power cord or buses.
| 22) 3508HB2C D240 TALL maintain US CA inced 15/4/00 11:50:45 AM & OPTIONALLY HARD WIRING THE PRODUCT Os we (150 mm} smn Ensure the drawer is removed and then rotated counterclockwise to prevent kinked hoses. Remove knock-out for cable clamp. Fit suitable cable clamp for the conduit and terminate the wiring as shown. Use copper conductors only. Remove Power supply Remove the access cover HH Ensure the drawer clips on both sides are reset. Ensure the drawer is now rotated clockwise back.
| 11,2) 2 CHARCOAL DD24D TALL inguinal ICA Inc id 15/4109 11:51 1H AM URE DRE REMOVAL ie i ATTACH SIDE MOUNTING BRACKETS Ensure hoses and if top mounting brackets are being Clip all four side mounting brackets into their used, ensure they'e securely tied (od chordate nationwide | slots using a flat-bladed screwdriver, Ensure ce, before sliding product into cavity. § Loris they're securely fitted before sliding product i oi into cavity.
£31) 2690HAZC OD24D TALL clinical CALIGULA. NG 15/4/00 11:51:18 AM (19) LEVEL AND SECURE THE PRODUCT | Ensure product is level and aligning with cabinetry. § Using the most appropriate i fencing Hexagonal socket supplied, fully extend leveling feet up to required distance by hand, {i SECURE THE PRODUCT | pen the upper drawer halfway. Using a flat-bladed screwdriver, prize (+ the plastic gray plug out of the trim molding, Ama.
§3.1) 690HAZC OD24D TALL clinical CALIGULA. NG 15/4/00 1 1:5147 AM 12) PLUMBING AND DRAINAGE OPTIONS | Dish Drawer: with Waste Disposal: BE DishDrawer® using Air Break with Drain Hose Joiner If space is limited fo fixing. push hose through drain hose support | 1a required height { “4 HIGH LOOP min. 6" £4150 mm} UST YE {950 vr) Max. height to tap of Air Break (counter top or wall mounted) 750 882.5 mm} { min.
2