Preliminary Specification Guide

ISO VIEW
A
B
C
866273C Date: 11.0.2021 | The models shown in this Preliminary Specification Guide (PSG) may not be available in all markets and are subject to change at any time. Product specifications may vary
from those shown. This PSG is superseded and will become obsolete upon launch of the product. This PSG should not be used as installation guidance for any product. Further information is required to
safely and correctly install the products featured here. Specific installation guidance will be available with the product on delivery and on our website fisherpaykel.com
PRODUCT DIMENSIONS
in mm
A Overall height* 4–6 /8 864–924
B Overall width 2 9/16 599
C Overall depth** 21 /4 55
D Height of custom upper front panel min. 17 /8 min. 442
E Height of custom lower front panel 12 1/4–14 /16 11–60
F Width of custom front panels 2 7/16–24 /16 596–615
G Depth of custom front panels 5/8–1/16 16–20
H Height of custom toe kick panel 1 /4 - 4 1/16 45 - 12
I Width of custom toe kick panel*** 2 7/16–24 /16 596–615
J Depth of custom toe kick panel max. /8 max. 9
K Depth of toe kick recess 1 9/16– 15/16 40–100
L Height from floor to
custom front panel base*
4–6 /8 100–160
M Depth of drawer opening** 20 /4 527
*depending on adjustment of levelling feet
**excluding custom panels and handles
***depending on cavity width
SPECIFICATIONS
Model No. DD24DTX6I1, DD24DTX6HI1
Dimensions
H 4–6 /8" (864–924mm) W 2 9/16"
(599mm) D 21 /4" (55mm)
Weight 14lb (61kg)
Electrical
Supply 120V, 60Hz
Service 9.6A
Receptacle -prong groundingtype
Plumbing
Supply /8" (9mm) male compression fitting
Pressure
Min. 0.1 MPa (14.5 psi)
Max. 1 MPa (145 psi)
CAVITY DIMENSIONS: STANDARD INSTALLATION
in mm
A Overall height* min. 4 min. 864
B Overall width min. 2 5/8 min. 600
C Overall depth min. 22 1/16 min. 560
*depending on adjustment of levelling feet
PRELIMINARY SPECIFICATION GUIDE INTEGRATED DOUBLE DISHDRAWER™ DISHWASHER,
TALL, SANITIZE
PLUMBING AND ELECTRICAL
ISO VIEW
Service outlet at rear extends both sides, hoses and cords can be routed
to either or both sides.
REAR VIEW
ISO VIEW PROFILE VIEW
A
CM
B
H
D
E
I
J
G
F
L
K
*depending on adjustment of leveling feet
2 7/16"
(62mm)
2 5/8"
(67mm)