User Guide

13
WASH MODIFIERS (SOME MODELS ONLY)
DD*C MODELS:
If sanitization has been successful:
The dishwasher will beep
0 will show in the display
The sanitize indicator will remain lit.
After 30 seconds the display will turn off.
If sanitization has not been successful:
An alert will sound
An alert code will show in the display
The sanitize indicator will not be lit.
Check if the water supply has been turned
off or the wash program interrupted.
Press once to stop the beeping and
then again to clear the alert code, then run
the sanitize cycle again.
See also section ‘How to attend to a fault’.
DD*D AND DD*I MODELS:
If sanitization has been successful:
The wash will finish as normal.
If sanitization has not been successful:
An alert will sound
When the drawer is opened the sanitize indicator will flash.
Check if the water supply has been turned off or the wash program interrupted.
Press and hold once to stop the beeping and a second time to clear the flashing alert
code.
Reset sanitize and then run the cycle again.
See also section ‘How to attend to a fault’