Installation Guide

13
1
2
!3 THERE ARE THREE DIFFERENT PLUMBING AND DRAINAGE OPTIONS. CHOOSE WHICH IS MORE SUITABLE.
DRAINAGE OPTION 1
Dishwasher and Ø 1 1/2” (38 mm) Standpipe
min. R 8”
(200mm)
29 1/2” - 34 3/4”
(750 - 883 mm)
1 1/2”
(38mm)
29 1/2 - 34 3/4” (750 - 883 mm)
max.
4 3/4“
(120mm)
step 14
min. 19 11/16” (500 mm)
Screw Drain hose
support to back wall
at correct height.
If space is limited
for fixing, push
hose through drain
hose support
to required height.
IMPORTANT!
Ensure that drain hose is installed as
close to the underside of the benchtop
as possible. This will ensure no waste
re-enters the drain hose in the event of
poor flow or a blockage in the plumbing.
Ensure the drain hose does not extend
into water retained in the trap; an air gap
is required to prevent waste water from
siphoning back into the tub.
IMPORTANT!
Ensure that drain connection will comply
with local plumbing regulations.