Planning File

DATA SHEET
24" Built-in Oven
DATE: 21.02.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
Model no:
OB24SCDEPX1, OB24SCDEX1, OB24SCD9PX1, OB24SCD7PX1, OB24SCD5PX1
(refer page 2 for metric measurements)
Product Dimensions
in
a Overall height of oven
2 9/16''
B Overall width of oven
2 7/16''
c Depth of oven frame and door (excludes dials, handle and front
stainless trim)
1/16''
d Depth of oven door and chassis (excludes handle and front
stainless trim)
22 1/4''
E Depth of chassis
21 7/16''
F Height of chassis
22 5/8''
G Width of chassis
21 7/8''
H Height from bottom datum to top of oven door
19 1/8''
I Height of control panel
 15/16''
J Height of stainless steel strip on control panel
/4''
K Height of stainless steel strip on door
4 1/4''
L Gap between door and control panel
1/2''
M Height from bottom datum to centerline of handle
18 1/4''
N Width of handle
22 1/4''
o Depth of handle (measured from front of door)
1 5/8''
p Thickness of handle
5/8''
Q Distance from bottom of door to bottom of product
5/16''
r Depth of door (open) (measured from front of door)
18 1/8''
Minimum Clearances
in
Minimum inside height of cavity:
22 1/16''
Minimum inside width of cavity
22 1/16''
Minimum inside depth of cavity
21 5/8''
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
0 5 10 20
inches
23 9/16''
21 7/16''
DATUM :
BOTTOM OF CHASSIS
A
F
DATUM : FRONT OF CHASSIS
DATUM : FRONT OF CHASSIS
r
N
M
L
K
J
FRONT VIEW
PLAN VIEW
PROFILE VIEW
p
D
I
H
o
E
G
q
B
C
r
23 7/16''