Installation guide

L(2,1) -1- 599496B OB3OAerotech installA2 USCA.Jndd 4/6/09 9:40:11 AM
UNPACK THE OVEN AND REMOVE THE DOOR(S)
Double models featured for illustration purposes only
Importand
Ensureyou remove
the long trim from
the packaging
ELECTRICAL CONNECTION TO JUNCTION BOX
Junction box location
for: undercounter
installation
Junction box
location for:
wall installation
OB30 lir_gle
Maxcurrestdaw: •!24A
Max k>aJ: 46 kW
OBSO Dog, hie
Maxccrrestdaw: 38;7A
Max o,_}J: 92 kW
whiteandgreen
groundingoven _-_
wires-factory
taped
-- cable from
i poweriupply
-box
black
wires
- UL -listed
conduit connector
Disconnect the power supply.
2 Remove the junction box cover.
3 Connect the oven cable to the junction box
through the U.L-listed conduit connector.
4 Connect the two black wires together with
twist-on connectors.
5 Connect the two red wires together with
twist-on connectors.
6 Connect electrical connection according to
local codes and ordinances.
If local codes permit connecting the cabinet o
grounding conductor to the neutral white wire
in the junction box:
7a Connect the factory-taped green and white oven
cable wires to the neutral (white) wire in the
junction box.
8a Replace the junction box cover.
OR If local codes DO NOT PERMIT
connecting the cabinet grounding
conductor to the neutral (white) wire in
junction box
7b Separate the factory-taped green and white
oven cable wires.
8b Connect the white oven cable wire to the
neutral (white) wire in junction box.
9b Connect the green grounding oven cable
wire to a grounded wire in the junction box.
IObReplace the junction box cover.
greengroundinc
over wires
- factorytaped
cable from
_ihr supply
X
,2
wires
- UL-listedconduit
connector
OR If connecting to a four-wire electrical
system:
7c Separate the green and white oven cable wires.
8c Connect the white oven cable wire to the
neutral (white) wire in junction box.
9c Connect the green grounding oven cable wire
to the (green) grounding wire in the junction
box.
Do not connect the green grounding wire to
the neutral (white) wire in junction box,
I0c Replace the junction box cover.