Installation guide

(1,1) -2- 599496B OB30Aerotech JnstallA2 USCA.Jndd 4/6/09 9:42:48 AM

F NAL CHECKUST TROUBLESHOOTING

[] Make sure the appliance is level and securely fitted to the cabinetry and both

oven doors open and close freely.

[] Make sure all the internal packaging has been removed from the oven cavity.

[] Make sure all oven vents and openings are clear and are free of any

obstruction/damage.

Importand

Failure to make sure aH oven vents are unobstructed may result in poor product performance.

[] Turn the power to the oven on. The clock should light up and flash 12:00pm.

[] Set the clock to the current time.

[] Turn the oven function knob to'Bake' and the oven temperature knob to

350 °F (180 °C). Air should blow out of the vent atthe bottom of the oven.

Inside the oven cavity, all three oven lights should come on. After five

minutes, open the oven door and the air inside should feel warm and the top

element should be glowing red.

[] Turn both the oven function knob and oven temperature knob back to OFF

and repeat for the other oven if the appliance is a double model.

If the appliance isnot functioning correctly after installation, check the

following:

[] Check that the circuit breaker has not tripped or the fuse blown.

[] Make sure that the electrical connections have been correctly made.

[] Make sure that power is being supplied to the oven.

[] Make sure the voltage is correct across all phases.

[] If a problem occurs, consult the Troubleshooting section of the User Guide.

[] If after checking these points you still need assistance or parts, please refer to

the Service & Warranty book for warranty details and your nearest Authorized

Service Center, or contact us through our local website, listed below.