Installation Guide

26
@0GAS CONVERSION (GAS GAS MODELS ONLY)
Replacing the oven broil burner injector
Injector
1 Gently unlock, the safety valve probe (V) and the ignition
electrode (E) from the burner.
Take care not to damage the probe and the ignition electrode.
2 Unscrew and remove the burner securing screw (A).
3 Withdraw the burner as shown beside.
4 Using a 9/32” (7mm) box spanner, unscrew the injector and replace it with a
new one
selected in accordance with the ‘Injectors table’.
5 Replace the burner and other components.
IMPORTANT!
●
Ensure the safety valve probe (V) and the ignition electrode (E) are replaced
correctly.
●
Check the correct operation of the safety valve and the ignition electrode.
Anchorage
clip
E
E
Anchorage
clip
V
V
A
Ignition
electrode
Safety
valve probe