User Manual

43
USING YOUR GAS COOKTOP
4 When the burner has lit, adjust the
flame anywhere between HI and LO.
y Do not adjust the dial between Hi and
O (OFF)
5 When you have finished cooking, turn
the clockwise back to O (OFF).
y If you are using LP gas, there may be
a slight ‘extinction pop’ or flash at the
flame spreader a few seconds after
the burner has been turned off. This is
normal for LP gas.
Flame failure protection
Your cooktop is equipped with flame failure protection: the gas supply will
automatically be cut off to a burner that is accidently blown out by a draught or
extinguished by a spill.