Installation Guide

17
4
Restrain the appliance
to the cart with straps.
5
Remove the brackets
on the other side of
the appliance.
6
Tilt the appliance backward
onto the cart.
7
Set aside the pallet and
push the cart to the
installation location.
2
Tilt the appliance
slightly to the
opposite side.
3
Insert the hand truck
under the side of the
appliance where the
brackets were removed.
Do NOT insert the hand
truck to the front or
back of the appliance.
Moving your appliance
1
Remove the brackets from one side of the
appliance. (For single door models, remove the
brackets on the non-hinged side of the appliance.)
Note: Location of brackets depends on the
modelof your appliance.
USER GUIDE
NZ AU GB IE HK SG IN US
ACTIVESMART™
INTEGRATED REFRIGERATOR
RS90A, RS9120W,
RS36A72, RS36A80 & RS36W80 models
Water fittings and
Water filter kits Installation kit
2
Remove the water fittings and water filter
kits, Installation kit, andMiscellaneous
itemspack from inside the appliance.
Refer to 'Components' (pages 4 – 5).
IMPORTANT!
●
Be careful when unpacking to prevent damage to the surface of your appliance.
●
Ensure that the appliance is stable to prevent from tipping over when unpacking.
●
Do not open the doors to prevent the appliance from tipping over.
●
The appliance is heavy and requires a minimum of 2persons to unpack and install.
●
Ensure that the feet of the appliance are retracted.
●
If the appliance is damaged, contact your Fisher & Paykel dealer.
●
Take note of your model and registration numbers located at the lower right side of
theappliance. You will need these to request for servicing or repair of your appliance.
hand truck
Miscellaneous
items pack
!1 BEFORE INSTALLATION
Checking your appliance
1
Detach accessories box taped to
back panel ofappliance.
Refer to 'Components' (page 5).
IMPORTANT!
Be aware when removing the
carton that the accessories box
may have dislodged from
the rear of the appliance during
transit.