Installation Guide

43
5
Place the side trim against the alcove side wall with the shorter lip facing
the bottom (D).
– Ensure the side trim is positioned as high as it will go.
D
6
Engage the side trim with the brackets by pushing the trim inwards at the
locations of the top and middle side trim brackets.
7
Once the trim has engaged with top and middle brackets, push and engage
the side trim at the location of the bottom bracket (E).
Repeat for the remaining side trims.
IMPORTANT!
●
Each bracket has two engagement points for the trim to locate.
Ensure the trim isengaged at both points (F).
●
Ensure there are no visual gaps between the appliance and side trims.
●
Adjust the gaps by loosening the side trim screws and moving the trim
within clearance. Iffurther adjustment is required, relocate brackets to
desired position.
E
Suggestion by Derek showing
engagement in 2 places
“ensure they are fully engaged”
Side trim
bracket
F
Top view of side trim engaged
correctly in side trim bracket
Side trim
short lip
@6 CABINET TRIMS INSTALLATION — [B] FIXED SCREW METHOD