Installation Guide

12
!0DOOR CLEARANCE
Wall
115° DOOR OPENING
(FULL INTERNAL ACCESS)
90° DOOR OPENING
Insert hinge limiting pin
WARNING!

Before opening the doors, ensure that the appliance is
stable.
 
Follow these steps to avoid risks that can cause serious
injury or death.
For 90° door swing, a hinge limiting pin is supplied with
your appliance. This pin fits in the boreholes of the top
hinge.
1
Open door to 90°.
2
Insert the hinge limiting pin vertically into the bore hole.
– Apply a gentle tap to the pin if it does not slide
smoothly.
90° DOOR OPENING115° DOOR OPENING
[FULL ROTATION]
DOOR OPENING & CLEARANCE DIMENSIONS
d
A
b
c
b
c
a
e
DOOR CLEARANCE DIMENSIONS inches mm
A
Depth of door (widest opening) measured from front of door 37" 940
B
Depth of drawer (open) measured from front of drawer, including handle 15 3/4" 400
c
Depth of drawer (open) measured from front of drawer, excluding handle 143/16" 360
d
Minimum door clearance* to adjacent wall (115°—full internal access) 16 1/8" 410
e
Minimum door clearance* to adjacent wall (90°—reduced internal access) 45/16" 110
* Measured from front cabinetry edge.