Installation Guide

29
B
Remove hanging brackets
1
Remove the M8 washers and M8 nuts fromthe M8
studs at the top the door (A) using the hex key and
spanner. Keep the washers and nuts to reuse later.
2
Remove the hanging bracket from the top of each
door and set aside (B) for later installation.
A
D
C
C
D
E
Attach the door and drawer handles (C)
3
Align the handle holes with the door panel
holes and secure with M5x25 pan head
socket screws (4).
Attach side brackets and straps (E)
5
Align the brackets and straps to the holes
on the side of the panel and secure with
#8x16 mush washer screw (12).
Attach the hanging brackets (D)
4
Align the bracket to the holes and
secure with #8x16 mush washer screw
(12).
Internal box
B
Door panel
attachment kit
Side bracket
(10)
Side strap
(10)
#8 x 16 Mush Washer Twin Thread Philips Screw
#8 x 16
Mush Washer
Twin Thread
Philips Screw
#8x16 mush washer
(Custom) screw (24)
Door handle kit
M5 x 25 Pan Head Socket Screw
M5 x 25 Pan Head Socket Screw
M5x25 pan head socket
screw (8)
Tools
Hex key
FPA spanner
Powered driver
@0DOOR PANEL INSTALLATION—CUSTOM