User Guide
Table Of Contents
- Safety and warnings
- Before you begin
- First use
- Using the oven light
- Using the kitchen timer
- Changing the time
- Locking the control panel
- Unlocking the control panel
- Cooking options
- Guided cooking
- Cooking guide
- Cooking charts
- Burner use
- User preference settings
- WiFi connection and remote mode
- Sabbath Mode
- Care and cleaning
- Using Self Clean
- Troubleshooting
- Alert codes
- Warranty and service
60
CARE AND CLEANING
Replacing the oven light bulbs
IMPORTANT!
Use a 40 W, 120 V appliance light bulb for replacement. Do not use a standard light bulb
in any oven, the heat will break it.
Changing the bulb
1 Allow the oven (including the lamp cover and the bulb) to cool completely.
2 Remove any shelves that may get in the way.
3 Remove the door if the lamp will be hard to reach.
4 Turn the power supply to the range off at the main fuse or circuit breaker panel. If you
don’t know how to do this, contact an electrician.
IMPORTANT!
Failure to disconnect the range from the power supply may result in death or
electrical shock.
5 Remove the lamp cover: turn it counterclockwise to unscrew.
6 Remove the faulty bulb and replace with a new 40 W appliance light bulb.
7 Replace the lamp cover: turn it clockwise to tighten.
8 Turn the power supply to the range back on at the main fuse or circuit breaker panel.
Lamp covers