Installation Guide
Table Of Contents
- Safety and warnings
- Integrated refrigerator & freezer
- Integrated refrigerator-freezer
- Integrated wine cabinet
- Supplied parts
- Required parts
- Door panel kit
- Handle kit
- Hinge change kit
- Wine display accessories
- Tools
- Product dimensions
- Cabinetry dimensions — Single installation
- Cabinetry dimensions — Multiple installation
- Stainless steel Door panel dimensions — Single installation
- Custom Door panel dimensions — Single installation
- Custom Door panel dimensions — Multiple installation
- Toe kick dimensions
- Installation options
- Door clearance
- Drawer clearance
- Electrical and plumbing
- Custom door panel install dimensions
- Before installation
- Cavity preparation
- Appliance preparation
- Door panel preparation — Stainless steel panel
- Door panel preparation — Custom panel
- Door panel preparation — Wine cabinet only
- Power and water supply connection
- Install water filter
- Single installation — Align appliance into cabinetry
- Single installation — Secure appliance into cabinetry
- door panel installation
- Toe kick installation
- Grilles installation
- Carbon filter installation
- Air flow divider installation
- Cabinet trims installation
- Top trim & hinge pocket covers installation
- Multiple installation — Appliance preparation
- Multiple installation — Align first appliance into cabinetry
- Multiple installation — Secure first appliance into cabinetry
- Multiple installation — Align second appliance into cabinetry
- Multiple installation — Secure second appliance into cabinetry
- Multiple installation — Install cabinet trims
- Wine display for Wine cabinet (optional)
- Change the door hinges (optional)
- Final checklist
25
CUSTOM DOOR PANEL INSTALL DIMENSIONS
For Wine cabinet, the Custom door panel must leave the glass pane visible. A full custom panel sheathing over the glass pane does not meet the specifications of this appliance.
3/4” (20mm)
31/2” (90mm)
2” (50mm)
2” (50mm)
2” (50mm)
2” (50mm)
77 7/8” – 81 7/8” (1978 – 2080mm)
70” (1778mm)
50” (1270mm)
20” (508mm)
5” (127mm)
Do not place pilot holes for
handle attachment in marked
areas to avoid clashing with
panel attachment brackets.
2” (51mm)
8” (203mm)
117/8” (302mm)
23/8” (60mm)
Ø1/16” (Ø2mm) REF
For 6" (152mm) toe kick, door panel
height should be 2" (51mm) shorter
For 2" (51mm) toe kick, door panel
height should be 2" (51mm) longer
1 1/4” (32mm) — For Single install
1 5/16 (33mm) — For Multiple install
24" WINE CABINET
22x Pilot holes recommended
for bracket attachment.
(Do not penetrate front surface).
16 5/16" (415mm)
62 9/16 (1589mm)
7 7/8" (200mm)