Installation Guide

36
Attaching the short glass trims
Place the short trim along the
length of the top of door panel
cutout across the top ends of the
long trims.
Attach the peeled portion
starting from one end of flange
perpendicular to top end of
long trim.
long trim
short trim
Installation kit
Short trim (2x)
Tools
Cutter
DOOR PANEL PREPARATION — WINE CABINET ONLY
1
3
Cut both ends of the short trim
to length.
Peel off a small portion of red
protective film from the short
edge.
2
short edge
long edge
short trim
long trim
Continue attaching the short
trim for the length of the top of
door panel cutout, peeling off
the film as you go.
Ensure the trim is aligned flush
to inside edge of flange.
Attach the remaining peeled
portion of short trim to the
flange perpendicular to top end
of the other long trim.
Repeat steps 1 – 5 to the
bottom of door panel cutout.
4
short trim