Installation Guide
Table Of Contents
- Safety and warnings
- Integrated refrigerator & freezer
- Integrated refrigerator-freezer
- Integrated wine cabinet
- Supplied parts
- Required parts
- Door panel kit
- Handle kit
- Hinge change kit
- Wine display accessories
- Tools
- Product dimensions
- Cabinetry dimensions — Single installation
- Cabinetry dimensions — Multiple installation
- Stainless steel Door panel dimensions — Single installation
- Custom Door panel dimensions — Single installation
- Custom Door panel dimensions — Multiple installation
- Toe kick dimensions
- Installation options
- Door clearance
- Drawer clearance
- Electrical and plumbing
- Custom door panel install dimensions
- Before installation
- Cavity preparation
- Appliance preparation
- Door panel preparation — Stainless steel panel
- Door panel preparation — Custom panel
- Door panel preparation — Wine cabinet only
- Power and water supply connection
- Install water filter
- Single installation — Align appliance into cabinetry
- Single installation — Secure appliance into cabinetry
- door panel installation
- Toe kick installation
- Grilles installation
- Carbon filter installation
- Air flow divider installation
- Cabinet trims installation
- Top trim & hinge pocket covers installation
- Multiple installation — Appliance preparation
- Multiple installation — Align first appliance into cabinetry
- Multiple installation — Secure first appliance into cabinetry
- Multiple installation — Align second appliance into cabinetry
- Multiple installation — Secure second appliance into cabinetry
- Multiple installation — Install cabinet trims
- Wine display for Wine cabinet (optional)
- Change the door hinges (optional)
- Final checklist
45
Miscellaneous
components
Air toe kick seal (1x)
Toe kick install kit
Toe kick panel (1x)
Tools
Cross-head
screwdriver
M4 hex key (1x)
Position the toe kick in front of the mounting plate.
z
The spacers on the toe kick must be aligned with the
magnets of the mounting plate.
Press the toe kick firmly onto the mounting plate to fix
the position.
z
For custom toe kick, spacers are not needed.
z
For correct dimensions of toe kick, refer to 'Toe kick
panel dimensions' for more information.
TOE KICK INSTALLATION
toe kick
1
2
1
Attaching the mounting plate
Attaching the toe kick panel
Re-attach the toe kick mounting plate to the plinth
using same screws that were set aside previously.
Peel off the adhesive tape backing of the magnets
attached to the mounting plate.
z
Ensure the adhesive surface is clean and free of dust
or small particles.
If toe kick depth is less than 3 5/8" (92mm), attach an
air toe kick seal to the mounting plate.
Peel off the adhesive tape of air toe kick seal and attach
to the middle of the back side of the mounting plate.
Press firmly to ensure the tape adheres to the mounting
plate.
mounting plate
adhesive tape
spacer
air toe kick seal
Illustrations may differ from your purchased appliance.