Installation Guide
Table Of Contents
- Safety and warnings
- Integrated refrigerator & freezer
- Integrated refrigerator-freezer
- Integrated wine cabinet
- Supplied parts
- Required parts
- Door panel kit
- Handle kit
- Hinge change kit
- Wine display accessories
- Tools
- Product dimensions
- Cabinetry dimensions — Single installation
- Cabinetry dimensions — Multiple installation
- Stainless steel Door panel dimensions — Single installation
- Custom Door panel dimensions — Single installation
- Custom Door panel dimensions — Multiple installation
- Toe kick dimensions
- Installation options
- Door clearance
- Drawer clearance
- Electrical and plumbing
- Custom door panel install dimensions
- Before installation
- Cavity preparation
- Appliance preparation
- Door panel preparation — Stainless steel panel
- Door panel preparation — Custom panel
- Door panel preparation — Wine cabinet only
- Power and water supply connection
- Install water filter
- Single installation — Align appliance into cabinetry
- Single installation — Secure appliance into cabinetry
- door panel installation
- Toe kick installation
- Grilles installation
- Carbon filter installation
- Air flow divider installation
- Cabinet trims installation
- Top trim & hinge pocket covers installation
- Multiple installation — Appliance preparation
- Multiple installation — Align first appliance into cabinetry
- Multiple installation — Secure first appliance into cabinetry
- Multiple installation — Align second appliance into cabinetry
- Multiple installation — Secure second appliance into cabinetry
- Multiple installation — Install cabinet trims
- Wine display for Wine cabinet (optional)
- Change the door hinges (optional)
- Final checklist
49
top cover
trim cap
trim cap
notch
magnet housing
DOOR COVERS & TRIMS INSTALLATION
Re-installing the top cover (for all models)
Remove the backing film of dual adhesive strips pre-attached to the top of the door. Ensure the magnet is in place before installing the top cover.
2
Align the top cover to the top
of the door.
Clip the notch into the magnet
housing, and the trim caps on
top of the adhesive strips.
Press down both ends of the top
cover to engage the trim caps on
the adhesive strips.
Ensure the magnet remains in
place and not damaged as this
will affect the operation of the
appliance.
Illustrations may differ from your purchased appliance.
Trims install kit
Door panel side
cover (2x)
For Refrigerator or Freezer/
Wine Cabinet
Door panel side
cover (2x)
For Refrigerator-Freezer
Drawer panel side
cover (2x)
For Refrigerator-Freezer
Drawer top trim (1x)
For Refrigerator-Freezer
Installing the door side covers
Ensure the door surface is free of dust or small particles. Clean the door surfaces with a cleaning liquid to improve adhesion of the adhesive strips. Dual adhesive strips
are pre-attached to the side covers and drawer top trim.
Refrigerator or Freezer/
Wine Cabinet
Peel off the liners of the dual
adhesive strips.
Slide the door panel side cover
into the gap between the door
and door panel.
Align the top of the door panel
side cover with the top door
panel extrusion.
Press firmly to ensure the
adhesive strips are fully adhered
to the door surface.
door panel
side cover
1
Refrigerator-Freezer
Magnets are pre-attached to the door
and drawer side covers.
Press the door side covers into the
panel gaps on the right and left sides
of the door.
Align the top of the side covers to fit
with the right and left ends of the top
cover.
Remove the backing film of adhesive
strips on the drawer top trim.
Press down the trim firmly to engage
the back surface of drawer panel.
z
Ensure the trim is fully seated
against the drawer top surface.
Insert the drawer side covers into the
panel gaps on the right and left sides
of the drawer.
z
Ensure the cabinet is centered
to prevent the side covers from
interfering with the cabinet.
drawer top trim
drawer panel
side cover