Installation Guide
Table Of Contents
- Safety and warnings
- Integrated refrigerator & freezer
- Integrated refrigerator-freezer
- Integrated wine cabinet
- Supplied parts
- Required parts
- Door panel kit
- Handle kit
- Hinge change kit
- Wine display accessories
- Tools
- Product dimensions
- Cabinetry dimensions — Single installation
- Cabinetry dimensions — Multiple installation
- Stainless steel Door panel dimensions — Single installation
- Custom Door panel dimensions — Single installation
- Custom Door panel dimensions — Multiple installation
- Toe kick dimensions
- Installation options
- Door clearance
- Drawer clearance
- Electrical and plumbing
- Custom door panel install dimensions
- Before installation
- Cavity preparation
- Appliance preparation
- Door panel preparation — Stainless steel panel
- Door panel preparation — Custom panel
- Door panel preparation — Wine cabinet only
- Power and water supply connection
- Install water filter
- Single installation — Align appliance into cabinetry
- Single installation — Secure appliance into cabinetry
- door panel installation
- Toe kick installation
- Grilles installation
- Carbon filter installation
- Air flow divider installation
- Cabinet trims installation
- Top trim & hinge pocket covers installation
- Multiple installation — Appliance preparation
- Multiple installation — Align first appliance into cabinetry
- Multiple installation — Secure first appliance into cabinetry
- Multiple installation — Align second appliance into cabinetry
- Multiple installation — Secure second appliance into cabinetry
- Multiple installation — Install cabinet trims
- Wine display for Wine cabinet (optional)
- Change the door hinges (optional)
- Final checklist
52
Tools
Ruler
Roll the first appliance slowly into one side of the cabinetry until the
anti-tip bracket overlaps the back edge of the appliance.
Ensure the bracket overlaps the appliance by a minimum 7 1/16" (180mm)
for a secure hold. Refer to 'Attach the anti-tip bracket' for more information.
Align the top cap of the first appliance flush with the front of the spacer.
MULTIPLE INSTALLATION — ALIGN FIRST APPLIANCE INTO CABINETRY
Mark the step of the depth gauges on the cabinetry side of the
door based on the thickness of door panel.
Align the marked line flush with the front surface of the adjacent
cabinetry.
PROFILE VIEW
min 7 1/16" (180mm)
Pushing first appliance into the cabinetry
Aligning the depth gauges
1
1
first appliance
anti-tip bracket
top cap
marked line
spacer
depth gauge
Illustrations may differ from your purchased appliance.