Installation Guide
Table Of Contents
- Safety and warnings
- Integrated refrigerator & freezer
- Integrated refrigerator-freezer
- Integrated wine cabinet
- Supplied parts
- Required parts
- Door panel kit
- Handle kit
- Hinge change kit
- Wine display accessories
- Tools
- Product dimensions
- Cabinetry dimensions — Single installation
- Cabinetry dimensions — Multiple installation
- Stainless steel Door panel dimensions — Single installation
- Custom Door panel dimensions — Single installation
- Custom Door panel dimensions — Multiple installation
- Toe kick dimensions
- Installation options
- Door clearance
- Drawer clearance
- Electrical and plumbing
- Custom door panel install dimensions
- Before installation
- Cavity preparation
- Appliance preparation
- Door panel preparation — Stainless steel panel
- Door panel preparation — Custom panel
- Door panel preparation — Wine cabinet only
- Power and water supply connection
- Install water filter
- Single installation — Align appliance into cabinetry
- Single installation — Secure appliance into cabinetry
- door panel installation
- Toe kick installation
- Grilles installation
- Carbon filter installation
- Air flow divider installation
- Cabinet trims installation
- Top trim & hinge pocket covers installation
- Multiple installation — Appliance preparation
- Multiple installation — Align first appliance into cabinetry
- Multiple installation — Secure first appliance into cabinetry
- Multiple installation — Align second appliance into cabinetry
- Multiple installation — Secure second appliance into cabinetry
- Multiple installation — Install cabinet trims
- Wine display for Wine cabinet (optional)
- Change the door hinges (optional)
- Final checklist
59
1 Rotate the top hinge (A) outwards and remove the top hinge pocket cover (B)
using the flat head screwdriver in the slot of the cover.
2 Unscrew M6x16 countersunk screws (C) to remove top hinge, and set
aside to use later.
3 Unscrew M6x16 countersunk screws (D) from hinge pocket to remove hinge
pocket and top alcove bracket.
4 Unscrew M5x12 countersunk screws (E) to remove top hinge bracket and spacer.
5 For the non-hinge side, remove the top alcove bracket by unscrewing the M6x16
countersunk screws (F).
1 Rotate the middle hinge (A) and
unscrew M6x16 countersunk screws (B)
to remove middle hinge, and set
aside to use later.
2 Unscrew M5x12 countersunk
screws (C) to remove top hinge
bracket and spacer.
CHANGE THE DOOR HINGES (OPTIONAL)
b
D
E
C
A
f
B
A
C
Detaching the top door hinge
Detaching the middle door hinge — For Refrigerator-Freezer
1 Rotate the bottom hinge (A)
outwards and remove bottom hinge
pocket cover (B) using a flat head
screwdriver in theslot.
2 Remove the hinge by unscrewing the
M6x16 countersunk screws (2x) (C).
3 Open the water filter hatch on
the bottom grille and unscrew the
#8x16 screw (D) while holding the
grille in place.
4
Remove the bottom grille by
unscrewing the #8x16 screws (E) from
the bottom left and right of the grille.
5 Remove bottom hinge
bracket by unscrewing M6x16
countersunk screws (F).
IMPORTANT!
Do not remove plinth-to-cabinet retention
brackets!
Detaching the bottom door hinge — For Refrigerator & Freezer / Wine Cabinet
B
d
a
F
C
E
E
Do not
remove!