Installation Guide
Table Of Contents
- Safety and warnings
- Integrated refrigerator & freezer
- Integrated refrigerator-freezer
- Integrated wine cabinet
- Supplied parts
- Required parts
- Door panel kit
- Handle kit
- Hinge change kit
- Wine display accessories
- Tools
- Product dimensions
- Cabinetry dimensions — Single installation
- Cabinetry dimensions — Multiple installation
- Stainless steel Door panel dimensions — Single installation
- Custom Door panel dimensions — Single installation
- Custom Door panel dimensions — Multiple installation
- Toe kick dimensions
- Installation options
- Door clearance
- Drawer clearance
- Electrical and plumbing
- Custom door panel install dimensions
- Before installation
- Cavity preparation
- Appliance preparation
- Door panel preparation — Stainless steel panel
- Door panel preparation — Custom panel
- Door panel preparation — Wine cabinet only
- Power and water supply connection
- Install water filter
- Single installation — Align appliance into cabinetry
- Single installation — Secure appliance into cabinetry
- door panel installation
- Toe kick installation
- Grilles installation
- Carbon filter installation
- Air flow divider installation
- Cabinet trims installation
- Top trim & hinge pocket covers installation
- Multiple installation — Appliance preparation
- Multiple installation — Align first appliance into cabinetry
- Multiple installation — Secure first appliance into cabinetry
- Multiple installation — Align second appliance into cabinetry
- Multiple installation — Secure second appliance into cabinetry
- Multiple installation — Install cabinet trims
- Wine display for Wine cabinet (optional)
- Change the door hinges (optional)
- Final checklist
44
TOE KICK INSTALLATION
Loosen the screw at the bottom
of the door, and slide thelocking
bracket out until it touches the panel.
Refrigerator-Freezer
The locking bracket is located at the
bottom of the top door panel.
Fix the locking bracket to the door
panel with 8Gx16 countersunk screw.
Re-tighten the screw at the bottom
of the door.
Loosen the cap screws of the
adjustment brackets on both
sides of the plinth with a hex key.
Tools
Cross-head
screwdriver
Cutter
M4 hex key (1x)
13mm spanner (1x)
Adjust the brackets to the
desired depth by moving it
forward/backward.
Re-tighten the cap screws once
satisfied.
DOOR PANEL INSTALLATION
B
REFRIGERATOR OR FREEZER / WINE CABINET
REFRIGERATOR—FREEZER
1
1
2
2
3
cap screw
adjustment
brackets
Adjusting mounting plate bracketsInstalling locking bracket
Illustrations may differ from your purchased appliance.