Installation Guide

62
A
NO FILL NO FILL NO FILLFILL
CHANGE THE DOOR HINGES (OPTIONAL)
1 Unscrew the M5x10 screws (4x) to
remove the top adapter bracket from
the top of the door (A).
2 Install the new top adapter bracket into
the other side of thetop of the door
with M5x10 screws (4x) (B).
1 Remove the door panel locking
bracket and washer from thebottom
of the door by unscrewing M6x25
screw (1x) (C).
2 Remove the bottom adapter bracket
and spacer from the bottom of the
door by unscrewing M6x25 screws (2x)
andM5x30 screw (1x) (D).
3 Install the new bottom adapter bracket
and existing spacer to the other side of
the door with M6x25 screws (2x) and
M5x30 screw (1x) (E).
4 Install the existing door panel locking
bracket and washer tothe other side of
the door with M6x25 screw (1x) (F).
e
f
use existing
locking bracket
NO FILL NO FILL NO FILLFILL
b
NO FILL NO FILL NO FILLFILL
use new top
adaptor bracket
NO FILL NO FILL NO FILLFILL
Changing the top door brackets Reinstalling the door
Changing the bottom door bracket
use new bottom
adaptor bracket
and spacer
NO FILL NO FILL NO FILLFILL
Bottom/middle hinge
Top hinge
M6x10 hex screws
1 Secure the door to the top hinge and
bottom/middle hinge with M6x10
hex screws (4x).
‘I’
T20 screw
2 Activate the hinge spring by turning the
star T20 screws to the I position.
3 Return the appliance to the
upright position, and reinstall all
covers and trims.
NO FILL NO FILL NO FILLFILL