INTEGRATED COLUMNS RS1884FJ, RS2484FJ, RS3084FJ, RS2484S & RS3084S models INSTALLATION GUIDE US CA 847985C 05.
TABLE OF CONTENTS 1 SAFETY AND WARNINGS 2 INTEGRATED COLUMNS 3 COMPONENTS LIST 4 PRODUCT DIMENSIONS AND SPECIFICATIONS 5 CABINETRY OPTIONS 6 CAVITY DIMENSIONS 7 DOOR AND TOE KICK PANEL DIMENSIONS 8 CUSTOM DOOR PANEL DIMENSIONS 9 DOOR OPENING ROTATION !0 ELECTRICAL AND PLUMBING !1 BEFORE INSTALLATION !2 UNPACKING AND MOVING YOUR PRODUCT !3 ATTACH THE ANTI-TIP BRACKET !4 CONNECT TO WATER AND POWER SUPPLY OR !5 SINGLE INSTALLATION !6 DUAL INSTALLATION !7 INSTALL WATER FILTER !8 INSTALL BRACKETS TO DOOR PA
4 PRODUCT DIMENSIONS AND SPECIFICATIONS C A B FRONT VIEW PROFILE VIEW RS18 RS24 RS30 inches (mm) inches (mm) inches (mm) 84” (2134) 84” (2134) 84” (2134) 17 3/4” (451) 23 3/4” (603) 29 3/4” (756) 24” (610) 24” (610) 24” (610) Door clearance 20” (508mm) 26” (660mm) 32” (813mm) Weight (including packaging) 260lb (118kg) 302lb (137kg) 344lb (156kg) Hettich K05 Hettich K05 Hettich K05 PRODUCT DIMENSIONS A Overall height of product B Overall width of product C Overall depth of prod
7 DOOR AND TOE KICK PANEL DIMENSIONS RS18 DOOR PANEL DIMENSIONS (STAINLESS STEEL) RS24 RS30 inches (mm) inches (mm) inches (mm) A Height of door panel 79 7/8" (2029) 79 7/8" (2029) 79 7/8" (2029) B Width of door panel 17 3/4” (451) 23 3/4" (603) 29 3/4" (756) C Depth of door panel (excluding door handle) 3/4” (19) 3/4” (19) 3/4” (19) DOOR PANEL DIMENSIONS (CUSTOM)* A Height of door panel 77 7/8” – 81 7/8” (1978 – 2080) 77 7/8” – 81 7/8” (1978 – 2080) 77 7/8” – 81 7/8” (1978 – 208
CUSTOM DOOR PANEL DIMENSIONS Custom door panel dimensions 5” (127mm) 14 7/8” (378mm) 7/8” x Ø1/8” (22mm x Ø2mm) 3/4” (20mm) 2” (50mm) 20” (508mm) 2 3/8” (60mm) Do not place handle holes in marked areas to avoid clashing with panel attachment brackets 2” (50mm) 50” (1270mm) 70” (1778mm) 77 7/8” – 81 7/8” (1978 – 2080mm) ● The thickness of the custom door panel can vary provided that the screws do not penetrate beyond the full depth of the door panel.
8 5” (127mm) 2” (51mm) 2” (50mm) 3/4” x Ø1/8” 18mm x Ø2mm Do not place handle holes in marked areas to avoid clashing with panel attachment brackets 3/4” (20mm) 50” (1270mm) 3 1/2” (90mm) Do not place handle holes in marked areas to avoid clashing with panel attachment brackets 70” (1778mm) 2” (50mm) 2 3/8” (60mm) 77 7/8” – 81 7/8” (1978 – 2080mm) 2” (50mm) 3/4” (20mm) 2” (50mm) 7/8” x Ø1/8” (22mm x Ø2mm) 8 7/8” (225mm) 2” (50mm) 20” (508mm) 2” (51mm) 2” (50mm) 8” (203mm) 3 1/2” (90m
9 DOOR OPENING ROTATION Z C B A For 90° door swing a hinge limiting bolt is supplied with your appliance. This pin fits in the boreholes of the top hinge (Z). A WARNING! ● ● Wall 115° DOOR OPENING (FULL ROTATION) Wall 90° DOOR OPENING Before opening the doors, ensure that the appliance is stable. Follow these instructions to avoid risks that can cause serious injury or death. 1 Open door to 90°. 2 Align the hinge limiting bolt vertically with the bore hole.
!1 BEFORE INSTALLATION IMPORTANT! ● ● ● ● ● ● Ensure your appliance is not exposed to any heat generating appliance eg cooktop, oven or dishwasher. The appliance has front and rear rollers for moving the appliance forward and backward. Do not move the appliance sideways to avoid damaging the rollers or the floor covering/surface. The appliance must be installed by a qualified installer, or Fisher & Paykel trained and supported service technician to avoid faulty electrical connection and water leaks.
@5 OPTIONAL — CHANGING OVER DOOR HINGES You have the option to change the door hinge side of your appliance from right hand hinge to left hand hinge or vice versa. A hinge change kit is required for this installation. ● ● IMPORTANT! ● Ensure that you remove all the shelves, covers and trims from the appliance before changing the hinges. Take care not to damage the door. We recommend to lay the appliance (door closed) onto its back on the pallet when removing the door hinges.
@6 FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER All models Check all parts are installed. Ensure the appliance is level. Ensure the appliance is securely fastened to the cabinetry with the supplied anti-tip bracket and fittings. Ensure the door/drawer can open and close freely with no resistance from surrounding cabinetry. Ensure hinge limiting bolt is fitted for 90° door swing. Ensure all internal and external packaging is removed from the appliance before use.