Installation Guide
14
9 DOOR OPENING ROTATION
RS18 RS24 RS30
DOOR OPENING AND CLEARANCE DIMENSIONS inches (mm) inches (mm) inches (mm)
A
Width of door (90° open) measured from front of door 20” (508) 26” (660) 32” (813)
b
Minimum door clearance* to adjacent wall** (115° — full internal access) 11 1/2” (292) 14” (356) 16 1/2” (419)
c
Minimum door clearance* to adjacent wall** (90° — reduced internal access) 4 5/16” (110) 4 5/16” (110) 4 5/16” (110)
* Measured from front cabinetry edge.
** Does not include the Custom door panels or handles to be manufactured and fitted by cabinetmaker.
For 90° door swing a hinge limiting bolt is supplied with your
appliance. This pin fits in the boreholes of the top hinge (Z).
WARNING!
●
Before opening the doors, ensure that the appliance is stable.
●
Follow these instructions to avoid risks that can cause serious
injury or death.
1 Open door to 90°.
2 Align the hinge limiting bolt vertically with the bore hole.
3 Insert the pin through the bore hole. Use a hammer to drive the pin
through the hole.
115° DOOR OPENING
(FULL ROTATION)
90° DOOR OPENING
B
AA
C
Wall Wall
Z