Manualshelf

Frameless Cabinetry Installation Guide

ManualsBrandsFisher & Paykel ManualsBuilt-In Bottom Freezer RefrigeratorsFisher & Paykel Panel Ready Built-In Bottom Freezer Refrigerator
31323334353637383940
32
@0 ATTACH SIDE TRIM BRACKETS – (A) FLEXIBLE SPRING CLIP METHOD
4
Insert the spring clip into the gap between the side trim and side trim bracket,
orientation as shown in figures D and E.
IMPORTANT!
Ensure spring clip is correctly oriented with the open loop facing the side trim lip.
Repeat this process for the remaining side trim.
5
Open refrigerator door. Place the assembled side trim with brackets and spring clips against
the alcove side wall with the shorter lip facing the bottom (refer to F).
IMPORTANT!
Ensure the side trim is positioned as high as it will go.
Push the side trim at each bracket location until there are no visible gaps between the trim
and cabinetry (refer to G).
Repeat this process for the remaining side trim.
G
F
Spring clip
Side trim lip
D
Top view of spring clip correctly inserted
between side trim and side trim bracket
E