Installation Guide

10
The drawings below apply to Ice only models only (RS36W80J). Dimensions apply for the preparation and installation of custom door panels.
For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com.
8CUSTOM DOOR PANEL INSTALLATION DIMENSIONS
BOTTOM PANEL—REAR VIEW
22" (558mm)
30 1/16" (764mm)
13 11/16" (347mm)
5 9/16" (141mm)
2 5/16" (58.1mm)
1 7/16" (37mm)
All measurements
to be made from
bottom left corner
4 15/16"
(126mm)
6 15/16"
(176mm)
24 15/16" (634mm)
26 15/16 " (684mm)
37 11/1 " (957.9mm)
Ø2mm REF
14x Pilot holes recommended for bracket attachment.
(Do not penetrate front surface).
40" (1016mm)
Ensure handle is mounted
65mm from edge of panel
to the center — this will avoid
interference with bracket.
34 3/16" (869mm)
15 3/16" (385mm)
5 1/6"
(129mm)
1 1/8"
(29mm)
3 7/16"
(87mm)
19 3/8" (492mm)
21 5/16" (542mm)
16 3/8" (416mm)
All measurements to be made
from top and centerline.
Cutouts are located in attachment bracket for Fisher & Paykel handle only.
Iflocatingcustom handle in the shaded area shown above, ensure handle screw
headsare countersunk into back of panel to avoid interference with hanging bracket.
Ø2mm REF
10x Pilot holes recommended
for bracket attachment.
(Do not penetrate front surface).
TOP PANEL—REAR VIEW
2 5/16" 58.1mm