Installation Guide
15
Checking your appliance
1
Remove accessories box
located at the back panel
ofappliance.
Refer to 'Components list'
(page 5) for contents of
accessories box.
IMPORTANT!
Be aware when removing the
carton that the accessories
box may have dislodged from
the rear of the appliance
during transit.
USER GUIDE
NZ AU GB IE HK SG IN US
ACTIVESMART™
INTEGRATED REFRIGERATOR
RS90A, RS9120W,
RS36A72, RS36A80 & RS36W80 models
Miscellaneous items pack
Water fittings and Water filter kits
Installation kit
2
Remove the waterfittings
and water filterkits,
installation kit, and
miscellaneous itemspack
from inside the appliance.
Refer to 'Components list'
(pages 4–5).
IMPORTANT!
Be careful when unpacking to prevent damage to the surface of your appliance.
Ensure that the appliance is stable to prevent from tipping over when unpacking.
Do not open the doors to prevent the appliance from tipping over.
The appliance is heavy and requires a minimum of 2persons to unpack and install.
Ensure that the feet of the appliance are retracted.
If the appliance is damaged, contact your Fisher & Paykel dealer.
Take note of your model and registration numbers located at the lower right side of
theappliance. You will need these to request for servicing or repair of your appliance.
!2BEFORE INSTALLATION
4
Restrain the appliance
tothe cart with straps.
5
Remove the brackets
on the other side of
theappliance.
6
Tilt the appliance backward
onto the cart.
7
Set aside the pallet and
push the cart to the
installation location.
2
Tilt the appliance
slightly to the
opposite side.
3
Insert the hand truck
under the side of the
appliance where the
brackets were removed.
Do NOT insert the hand
truck to the front or
back of the appliance.
Moving your appliance
1
Remove the brackets from one side of the
appliance. (For single door models, remove the
brackets on the non-hinged side of the appliance.)
Note: Location of brackets depends on the model
of your appliance.
hand truck