Installation Guide

ManualsBrandsFisher & Paykel ManualsBuilt-In Bottom Freezer RefrigeratorsFisher & Paykel Panel Ready Built-In Bottom Freezer Refrigerator

30

Attach the door panels

1

Open the door and loosen the M5x10 cross-head

screw (do not remove) at the sides of the doors (A).

2

Hang the door panel by inserting the M8 studs

through the holes of the hanging bracket (B).

3

Slide the forks of the side brackets onto the

screws of the door (C).

4

Screw the M8 washer and nut to the stud (D),

and re-tighten the side screws (E) to fix the

door panel (do not fully tighten). This will

allow opening the door without affecting

adjustment of the door panel.

C

A

E

Tools

FPA spanner

Hex key

Cross-head screwdriver

B

@0DOOR PANEL INSTALLATION—CUSTOM